Book now with code EOY2025
Dears, I have prepared the below video in Arabic for the Juniper apply-groups it is important feature used at JNCIE exam at the troubleshooting sections https://www.youtube.com/watch?v=osL-wiO2-fg
Hi I'm starting my preparations for JNCIE-SEC. I'm going to buy some real SRXes for my lab but I have a question regarding versions of SRX210: What is the difference between SRX210HE2, SRX210HE and SRX210BE? I'd like to buy 4 of them and I don't know which version should be enough for my lab. -- Regards Edit: I found the…
Hi guys, I've just download the free ebook from JNCIA learning centre "JNCIA-Junos Study Guide—Part 1", but on some pages I am missing text in the tables. I tried opening the pdf with other viewers, but it didn't help. For example, on page 45 there are 2 tables "Gracefully Shutting Down the Junos OS" and "Initial…
Hey, Just wondering if anyone has purchased books from https://www.onfulfillment.com/JuniperTraining/WelcomePublic.aspx?sid=323 Are these books meant to go along with the official classes? I was thinning of purchasing them for self-study, but not sure if they are meant to go along with the official course.
Hi all, I'm having an issue with a Juniper SRX device where the remote access web page crashes every so often. I'd like to create a simple script that restarts the web management service at specific intervals eg once a week Does anyone know the best way that I can do this? I found this on the Juniper site and think it may…
Hey everyone, Just needed some help on renaming a firewall rule. I have: set firewall family inet filter DENY term 1 then accept. However, I actually want this to be a DENY. I tried: rename firewall family inet filter DENY term 1 ? However it doesn't let me do it. Is there a way to rename the accept to a discard without…
Hey everyone, Going through Junos Genius and came across a question I don't understand. Give the following statement: route-filter 192.168.0.0/16 longer Which three routes would match (choose three): A. 192.168.0.0 B. 192.168.0.1 C. 192.168.1.0 D. 192.168.255.254 E. 192.169.0.0 The correct answer is B, C, and D. No subnet…
Hey everyone, Just a question on interface IP addresses... R1 and R2 are connected via their em1 interface. Here is the em1 config of R1: set interface em1 unit 0 family inet address 10.1.1.1/24 set interface em1 unit 0 family inet address 10.1.1.5/24 preferred R2 is configured with 10.1.1.2/24 only. I turned on OSPF…
Hey,Just a quick question on MC-LAGS. If you have CE1 connected to PE1 on ge-0/0/0 and PE2 on ge-0/0/1, why do you need to add the Gig interfaces to an ae? Why not just configure the MC-LAG parameters under ge-0/0/0 of PE1 and ge-0/0/1 of PE2? I understand that the system-id and mc-ae-id need to match from the perspective…
I went looking through through the Juniper support page and can't find a configuration guide for this thing. Is there anything similar to the Cisco show ip interface brief so I can see what the ports are labeled as? Specifically have a EX8200-8XS in slot 0 and 1.
It looks like you're new here. Sign in or register to get started.
Use code EOY2025 to receive $250 off your 2025 certification boot camp!