Options
Problem in Packet Tracer
gembird1
Registered Users Posts: 4 ■□□□□□□□□□
in CCNA & CCENT
Hello,i have a big problem in a packet tracer activity.When i click on a router or switch i got a "Router is locked" and i configure it
For example : When i click on Building 1 i got "Building 1 is locked ". Please help me !!!
Here you can see : CLICK
For example : When i click on Building 1 i got "Building 1 is locked ". Please help me !!!
Here you can see : CLICK
Comments
-
Optionsmikeybinec Member Posts: 484 ■■■□□□□□□□Sounds like you got a PT from an instructor.Cisco NetAcad Cuyamaca College
A.S. LAN Management 2010 Grossmont College
B.S. I.T. Management 2013 National University -
OptionsJon_Cisco Member Posts: 1,772 ■■■■■■■■□□Sounds like you need to connect a host to your router with a console cable.
-
Optionsgembird1 Registered Users Posts: 4 ■□□□□□□□□□Yes and when i conect the host with the router with console cable what i have to do in order to unlock it???? please help
-
Optionsednard Member Posts: 75 ■■□□□□□□□□You can't unlock it.
1. Access the host PC, double click it then go to Desktop > Command Prompt.
2. Find out the IP address of the router and use the command "telnet xxx.xxx.xxx.xxx" in command prompt, where the x's is the IP address of said router
3. Wahey, telnet access to the locked router. -
Optionsgembird1 Registered Users Posts: 4 ■□□□□□□□□□Thanks! I solved that problem and its fine! But there is other problem: when i go to configure the switch through Terminal ,it asks me for password?> What now ?
-
OptionsJon_Cisco Member Posts: 1,772 ■■■■■■■■□□try these:
cisco
class
They may not work but the Netacad uses them all the time so it might work for you. -
OptionsCiscoDidit Registered Users Posts: 4 ■□□□□□□□□□gembird1,Which netacad chapter lab activity are you referring to?