frame relay for home lab

dolphin_m70

hi guys

i have done all the cabling as in the Tech Lab to make a frame relay network (i have 3 2501 routers and DCE/DTE male cables )

ie
router1 -> frame relay switch
router 2, router3 are the routers conn to the frame relay

so the conn is as follows
router 2's s0 -> frame relay's s0
router3's s0 -> frame relay's s1

console cables are connected to console port of R2 and R3 which is conn to com1 and com2 ports in the PC resp
i have two hypererminal windows to configure R2 and R3
but how shud i configure the frame relay
as it is not conn thru console

cud any one pls help me with this
this is my home lab

EdTheLad

This is extremely difficult if your obese??
You must standup walk over to your router disconect the console port on one router and plug it into the other one you want to configure.Then take a large breath and walk back to your pc and hey presto you have an nmti session to your other router.If you need advice on how to get back to an nmti session on the other router let us know!