2621xm no ipv6 ?

Does I wrong something in this interfaces between R-R, S-R and H-R (R-router, S-Switch, H-hosts)

And when I try to put command ipv6 unicast-routing, it's unrecognize, or when just put ipv6 ? it said that is unrecognize command. It is only in router 2621XM.

And on the side from router0 f0/0/0 can't recognize ipv6 address command. WHY?

Untitled1.jpg

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Magic Johnson

That version of IOS on the 2621XM might not support ipv6?

mikeybinec

They do not.. Find a newer router with the ver 15 ios

tomislav91

How can i find it, newer version?

Is the connection of all interfaces OK between devices at the picture?

theodoxa

You need the Advanced IP Services or Advanced Enterprise IOS. For a 2600XM --

c2600-advipservicesk9-mz.124-15.T14.bin
c2600-adventerprisek9-mz.124-15.T14.bin

should support most of what you need for CCNA. The 2600XM series does not support IOS 15.

1700, 3700, and 2600XM Series -- IOS 12.4 (T Train)
ISR (1800, 2800, 3800 Series) -- IOS 15.1 (M or T Train)
ISR G2 (1900, 2900, 3900 Series) -- IOS 15.4 (T Train)

MTciscoguy

I have copies of the IOS you need, but you will need to get a different router

tomislav91

I put another router and it works, but no one switch i can use for ipv6