Options
Router Suggestions
The Silent Assassin
Member Posts: 39 ■■□□□□□□□□
in CCNA & CCENT
I am posting this here and not in the CCNA Sec sub-forum because of activity level.
I am preping for the CCNA Sec exam and I will need to get used to the CCP. I know about the features of it and the various things you can do inside of it but I need a router I can practice on. It doesn't need to have a ton of ports. Looking to spend about $100 - $150 on it.
Any and all suggestions welcome.
I am preping for the CCNA Sec exam and I will need to get used to the CCP. I know about the features of it and the various things you can do inside of it but I need a router I can practice on. It doesn't need to have a ton of ports. Looking to spend about $100 - $150 on it.
Any and all suggestions welcome.
Comments
-
Options
xnx
Member Posts: 464 ■■■□□□□□□□
Cisco 2651XM, comes with 2 ethernet interfacesGetting There ...
Lab Equipment: Using Cisco CSRs and 4 Switches currently -
Optionstheodoxa
Member Posts: 1,340 ■■■■□□□□□□
The 1841 or 881 should be good options.
The 1841 has 2 HWIC Slots and will run IOS 15.1
The 881 has no HWIC Slots, but has a Built-in 4-Port Switch and will run IOS 15.4R&S: CCENT → CCNA → CCNP → CCIE [ ]
Security: CCNA [ ]
Virtualization: VCA-DCV [ ] -
Options
rowelld
Member Posts: 176
The 1841 is an excellent option which will go through to the CCNP and CCIE.Visit my blog: http://www.packet6.com - I'm on the CWNE journey! -
Options
MTciscoguy
Member Posts: 552
I really like my 1841's, easy to upgrade memory and IOS, and not expensive, often times you can find them very reasonable with the optional WIC cards already installed and they are very easy to upgrade the CF cards, you don't have to use Cisco branded cards, I am running 512K sandisk cards in all of mine.Current Lab: 4 C2950 WS, 1 C2950G EI, 3 1841, 2 2503, Various Modules, Parts and Pieces. Dell Power Edge 1850, Dell Power Edge 1950.
