No CMOS Jumper, still works?
mr.comfortably
Member Posts: 83 ■■■□□□□□□□
in Off-Topic
Hi,
I noticed my computer turned on and operated normally with no jumper on pin 1,2 or 2,3.
Will this cause any damage, or does it reset the CMOS everytime?
Any information will be helpful, im a novice
Thank you,
Patrick
I noticed my computer turned on and operated normally with no jumper on pin 1,2 or 2,3.
Will this cause any damage, or does it reset the CMOS everytime?
Any information will be helpful, im a novice
Thank you,
Patrick
Comments
-
ibn_shaddad
Member Posts: 57 ■■□□□□□□□□
should work fine, without doing a reset.
Don't take my word, and test it with your hands.
This definitely will tell you betterWorking on: CCNA R&S, CCNA Sec, Security+
Learning: Python, C and C++ -
MTciscoguy
Member Posts: 552
I have had systems that did not have the jumper on them, as long as the battery was good, it would maintain the system settings, if you need to reset your machine, just pull the CMOS battery for a few seconds when you turn the system off.Current Lab: 4 C2950 WS, 1 C2950G EI, 3 1841, 2 2503, Various Modules, Parts and Pieces. Dell Power Edge 1850, Dell Power Edge 1950.