Dell N Series 6.2.6.6 firmware

DeathmageDeathmage Banned Posts: 2,496
Hey guys,

been having a few issues the past few weeks with port-channels and OSPF convergence and apparently the latest version of Dell's firmware for their brand-new N series switches fixes a long list of issues.

If anyone here has been having performance issues with their N series switches, the difference is noticeable. :)

Firmware Changes:

Fixes & Enhancements

New Features & Enhancements:
Added lower-case dot1x MAB user-name/password support to radius-server
Added ssh public key authentication support
Added TLSv1.0 as HTTPS protocol by default and disabled SSLv2 and SSLv3 by default
Kernel updates and SSL version upgrade to 1.0.1.o
PoE Controller firmware updated to 265_1

Fixes:
954419 - N4000 - 6.2.6.5 - Stack member crash "hapiMcAsyncTask"
954364 - N4000 - 6.2.6.5 - Stack member crash "hapiRxTask"
948955 - N-Series - 6.2.6.3 - Incorrect Dynamic MAC Address-table entry for Data-VLAN
939744 - N-Series-6.2.1.6-ip ospf and rip authentication encrypt string is showing in clear-text
939170 - N-Series - 6.2.1.6 - RSTP BPDU packet dropped if hello timer mismatch
936925 - N-Series-6.2.1.6 -Layer3 interface (vlans) stays down when stack master is powered off abruptly
936580 - N4000 - 6.2.1.6 -Switch stack unresponsive with mcastMapTask crash logs
936193 - N-Series - Observed "LLDP entry delete failed" log messages
934566 - N-Series-6.2.1.6-show buffers command shows incorrectly spaced or garbled output via telnet/SSH
934053 - N-Series - 6.2.1.6 - BGP AS Number Range (Unassigned by IANA)
927589 - N3000-6.2- IPv6 neighbor solicitation multicast not distributed to non-management stack members
927035 - N2048P - 6.2.0.5 - PoE interoperability issue with D-Link PoE Splitter
926627 - N-Series - 6.2.1.6 - Multiple vulnerabilities (CVE-2011-3389, CVE-2013-2566 and CVE-2015-280icon_cool.gif
926109 - N-Series - 6.2.1.6 - Port-security violation is not logged for ports with Sticky MAC enabled
923480 - N-Series - 6.2.1.5 - Port-Security (Sticky MAC) with voice VLAN is not working as expected
923462 - N-Series - 6.2.1.5 - Ports stop learning dynamic MAC address after disabling sticky MAC
921359 - N-Series - 6.2 - dot1x unauth-vlan not working with authentication order enabled
920185 - N3000 - 6.2 - Front 10G ports goes down when 10G SFP extension module is removed from the slot
914354 - N4000 - 6.2.0.5 - IPv6 Multicast not filtered by MLAG Peer-Link
913185 - N2000 - Switchport is not removed from unauth VLAN even after passing dot1x authentication.
913140 - N3000 - MLAG/LACP issue "Error allocating buffer pools for the received dot3ad data message"
907751 - N4000-6.2.0.5 - emWeb crash when Nessus Scan perform SSH login with Radius auth
890635 - N2000-6.1.2.4 - SNMP MIB Walk OID "1.3.6.1.4.1.674.10895.3000.1.2.100" returns URL http://0.0.0.0
859610 - N3000 - ssh public key authentication doesn't work
813685 - N3000 -IPV6 USGv6 Interoperability and Basic Conformance failures
939526 - N40xx - Stacked and running RPVST is often unable to learn GARP address after failover.
918049 - N20xx - 6.2.1.2 - SSH Radius authentication fails on first attempt
907697 - N20xx -6.1.2.4-dot1x mac based authentication,clients behind phones can't forward traffic
937583 - N40xxF - 6.2.0.5: Very slow response to 'show' CLIs when SFP/QSFPs are present
934044 - N2048 - 6.2.1.6: Switch crashes or hangs after multiple SSH session retries on switch
926091 - N40xxF - 6.2.0.5: Customer has stack and when issuing 'show' CLI causing his ping to timeout
924613 - N2048P - 6.2.0.5: CDC RX FIFO entry 45 ECC error seen
922438 - N-Series - 6.2.0.5/6.2.1.4: 'show port-security dynamic ' show learned even with no sec
921371 - N2048P - 6.1.2.4/6.2.0.5: Aastra 6725IP phone not getting power when connected to switch
920799 - N-Series - 6.1/6.2 - Ports flapping when port-channel membership is being modified via WebUI
891874 - N2048 - 6.1.2.4: Switch not sending snmp trap notification for UP/DOWN status on loopback interfaces
881612 - N2048 - 6.1.2.4: web timeout (HTTPS) does not depend on exce-timeout configuration
944153 - N4064F 6.2.1.6 : switch stack takes a very long time to respond for any sh commands
943187 - N4064F :6.2.1.6: stack of 2, stop processing incoming CPU packets when show tech-support
944106 - N3048 - 6.2.1.6 Banner is not displayed in running configuration after a reboot
865050 - N2048P v6.1.2.4 VoIP phones assigned to wrong VLAN since the stack was upgraded to v6.1.1.7
878235 - Routing issue, null address in ARP table after VLAN manipulation
881612 - N2048 - 6.1.2.4: web timeout (HTTPS) does not depend on exce-timeout configuration
883154 - N2048P - 6.1.2.4: Stack master unit crashing issuing some 'show' CLIs
886897 - N30XX v6.1.2.4 Ports on VLAN with PVST/R-PVST disabled not learning MAC addresses after reboot
890563 - ARP resolution not happening for iSCSI traffic when iSCSI optimization is enabled
891874 - N2048 - 6.1.2.4: Switch not sending snmp trap notification for UP/DOWN status on loopback interfaces
890635 - N-Series - 6.1.2.4 - SNMP MIB Walk OID "1.3.6.1.4.1.674.10895.3000.1.2.100" returns URL http://0.0.0.0
896750 - N-Series - 6.1.2.4 - IPv6 connectivity failure after stack member failure on N4064F stack with Fluid FS
897308 - N-Series Port-Security VoIP/PC issue
903943 - N-Series - 6.2.0.5 - N3000 - Receive and transmit packets dropped > MTU counters increasing
907269 - N-Series - 6.2.0.5 - Add 1G SFP (PN# FTRJ1319P1BTL) transceiver support
813685 - UNH - IPv6 - N3000 - USGv6 Interoperability and Basic Conformance failures
873414 - UNH : Unconfigurations of MTU values using the command "no system jumbo mtu" does not take effect in the DUT, after the DUT is configured with some random mtu value in the range of 1298-9216.
913069 - UNH : OSPF neighbourship not coming up on the dauntless after stack initiate failover, with MTU configured as 1298 and OSPF interface configured with ignore-mtu.
913071 - UNH : No ICMPv6 Too Big message sent on the interface, when the packet arrived on an interfaces that has less MTU configured.
913074 - UNH : DUT must drop the packet that has multicast address whose scop field contains the reserved value 0 as per RFC4291,section 2.7(page 14), but the ipv6 mrouter table has the learned-entry.
913068 - UNH : DUT should forward the packet that has multicast address whose scop field contains the reserved value "F" as per RFC4291 of section 2.7(page 14), but the first ICMPv6 echo request packet is getting dropped
913078 - UNH : In USGv6 Basic Conformance, the tests failed showing the reason "The device under test does not generate an ICMPv6 Parameter Problem messages in response to invalid packets".
913077 - UNH : In USGv6 Basic Conformance, the tests failed showing the reason "The device under test does not generate an Echo Reply to packets containing Pad1 or PadN options.".
913072 - UNH : DUT has problem in configuring and propagating IPv6 parameter as per the "v6LC.2.2.7c" test mentioned in the UNH defect
901088 - Connection fd is corrupt sometimes in bgp neighbor connection list
913061 - Flash format optionis missing on N4000 Series Bootmenu.
906510 - Route loop in leaf-spine topology after bringing down the link between Leaf-1 and spine-2
913067 - 6.2: Allow period '.' in configuration of the hostname
876886 - N4064F - 6.1.2.4: ARP entries with 0000.0000.0000 mac-address
883154 - N2048P - 6.1.2.4: Stack master unit crashing issuing some 'show' CLIs
839620 - N4032F Static IP Routing Issue.
921285 - DFE should to be turned on for 10Gb copper ports on N4000 Series.
921287 - Hotswapping different modules on N4000 Series causes the switch to crash.
921322 - OSAPI semaphores don't work when two tasks are waiting on the same semaphore.
922468 - After save and reload sticky mode functionality is not properly working.
907697 - N20xx dot1x mac based authentication,clients behind phones can't forward traffic
920185 - N3000-6.2-Front 10G ports goes down when 10G SFP extension module is removed from the slot
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formatting argument
Sign In or Register to comment.