CCNA Project - Need assistant
makorepo5
Registered Users Posts: 4 ■□□□□□□□□□
in CCNA & CCENT
Hello mates,
we've got a CCNA project and I cant manage to do the mission by my own without any guidelines.
I am asking an assistant or any one that can help (NOT SOLVED) the questions.
My skype is Yanov10
Thank you guys
we've got a CCNA project and I cant manage to do the mission by my own without any guidelines.
I am asking an assistant or any one that can help (NOT SOLVED) the questions.
My skype is Yanov10
Thank you guys
Comments
-
CiscoWayne
Member Posts: 57 ■■□□□□□□□□
What is the project?CCENT [X] CCNA [X] CCNP Switch [ ] CCNP Route [ ] CCNP Troubleshoot [ ]
Now working on CCNP Switch -
makorepo5
Registered Users Posts: 4 ■□□□□□□□□□
Yes I uploaded the PKA file and that says that i need owner approvel.Owner approval?
BTW, i writing the missions:
1.Configure IP to all the equipment
2.Configure password for all inside and outside routers
3.Create dynamic route between "cities"
4.Create defalut route between Lan routers to dynamic router above him
5.Create Vlans
6.Crate DHCP in every lan routers
7.All the station are behind NAT
8.Create Port forward to Web server
9.Create LACP to LAN2
10.Create LAN1 VTOP DOMAIN
11.Every switched should be manage by VLAN MANAGMENT
12.Backup startup-config to TFTP SERVER -
TWX
Member Posts: 275 ■■■□□□□□□□
If you just ask us questions as you work we can provide suggestions. I don't think that most users are going to go through your files.
In my case I don't even use a virtual lab, I bought equipment, so I can't go through files like yours. -
makorepo5
Registered Users Posts: 4 ■□□□□□□□□□
If you just ask us questions as you work we can provide suggestions. I don't think that most users are going to go through your files.
In my case I don't even use a virtual lab, I bought equipment, so I can't go through files like yours.
Thats the thing, I am not sure that i am doing my steps right and I need an assistant via skype.
Just asking if someone can help.. -
TWX
Member Posts: 275 ■■■□□□□□□□
I guess I'm not getting it. Administering Cisco equipment at this level is an entirely text-based process. How does that not translate itself well to a text-based discussion forum?
A couple of the major points for this being an online forum are that first, anyone can reply to what you ask and if someone replies something that's bogus, others can challenge them, and second, the problem and solution are both documented for others that come in. Neither is true in your skype session, and honestly I would be surprised if anyone takes you up on it. We're all here trying to help ourselves in addition to helping each other, and what you're asking of us is not keeping in that spirit.
