View flash from rommon Cisco 1900 router?

mikejensen83

Hello,

I am trying to view flash from rommon on a Cisco 1921 and no matter what I do I am stuck with the following:

rommon 10 > dir flash:
Please reset before executing this command
rommon 11 > dir usbflash0:
Please reset before executing this command
rommon 12 > dev
Devices in device table:
id name
flash: usbflash0
bootflash: boot flash
usbflash0: usbflash0
usbflash1: usbflash1

eprom: eprom

I have reloaded, tried again, but still get the message that says to "please reset before executing this command".


Any ideas?