error while upgrading ios

oucatfishoucatfish Member Posts: 5 ■□□□□□□□□□
hi.. this is the best site.. i have picked up so much here. i am thankful for your time.

below while upgrading the ios on a 2507 im getting a time out error. i can ping the router from the console and ping from dos to the router. can you help. thanks

the file begins loading then times out

zach(boot)#
zach(boot)#copy tftp flash

System flash directory:
File Length Name/status
1 3142744 igs-i-l.103-10
[3142808 bytes used, 5245800 available, 8388608 total]
Address or name of remote host [192.168.0.1]?
Source file name? c2500_c_l[1].122_31.bin
Destination file name [c2500_c_l[1].122_31.bin]? c2500_c_l[1].122_31.bin
Accessing file 'c2500_c_l[1].122_31.bin' on 1
Loading c2500_c_l[1].122_31.bin ... [timed out]
[failed]

zach(boot)#erase flash

System flash directory:
File Length Name/status
1 3142744 igs-i-l.103-10
[3142808 bytes used, 5245800 available, 8388608 total]

Erase flash device? [confirm]
Are you sure? [yes/no]: yes
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
zach(boot)#copy tftp flash

System flash directory:
No files in System flash
[0 bytes used, 8388608 available, 8388608 total]
Address or name of remote host [192.168.0.1]?
Source file name? c2500_c_l[1].122_31.bin
Destination file name [c2500_c_l[1].122_31.bin]? c2500_c_l[1].122_31.bin
Accessing file 'c2500_c_l[1].122_31.bin' on 192.168.0.1...
Loading c2500_c_l[1].122_31.bin ... [timed out]
[failed]

zach(boot)#ping
Protocol [ip]:
Target IP address: 192.168.0.1
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
zach(boot)#copy tftp flash

System flash directory:
No files in System flash
[0 bytes used, 8388608 available, 8388608 total]
Address or name of remote host [192.168.0.1]?
Source file name? c2500_c_l[1].122_31.bin
Destination file name [c2500_c_l[1].122_31.bin]? c2500_c_l[1].122_31.bin
Accessing file 'c2500_c_l[1].122_31.bin' on 192.168.0.1...
Loading c2500_c_l[1].122_31.bin ... [timed out]
[failed]

zach(boot)#
RATHER BE FISHING

Comments

Sign In or Register to comment.