How to get this serial connection up?
DSkeith
Registered Users Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
https://www.dropbox.com/s/lsfn6mdm2pv6bqg/acl.pkt?dl=0
I was wondering if anyone can help me get this going between the two routers on the serial (red) line. I tried int on the connection port on both routers with no shutdown but the lights won't come on.
There should also be a vlan of 192.168.3.6 on that connection, not sure if thats configured right. Any help is appreciated.
I was wondering if anyone can help me get this going between the two routers on the serial (red) line. I tried int on the connection port on both routers with no shutdown but the lights won't come on.
There should also be a vlan of 192.168.3.6 on that connection, not sure if thats configured right. Any help is appreciated.
Comments
-
Hondabuff
Member Posts: 667 ■■■□□□□□□□
Since you did not provide the enable password the answer is no.
enable secret 5 $1$mERr$9cTjUIEqNGurQiFU.ZeCi1
“The problem with quotes on the Internet is that you can’t always be sure of their authenticity.” ~Abraham Lincoln -
DCD
Member Posts: 475 ■■■■□□□□□□
It maybe a PT bug, I took off the connection and put it back and it came up. Also you don't have a IP address on R2.