What's wrong

I'm tryin to ping my computer to the router using the switch as my default gtwy. Heres my layout, what's wrong?

SW1
switchport access fa0/1 - 2
vlan 10

int vlan 10
ip add 10.1.10.1 255.0.0.0

int range fa0/1 - 2
switchport mode access
switchport access vlan 10

ip default-gateway 10.1.10.10 255.0.0.0

RTR1
int fa0/1
ip add 10.1.10.2 255.0.0.0

PC1
ip add 10.1.10.3 255.0.0.0
DG 10.1.10.10 255.0.0.0

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

atippett

fpso wrote: »

using the switch as my default gtwy.

this is your problem

MAC_Addy

The router should be the default gateway.

WastedHat

Trying changing PC1's default gateway to the switch SVI address - 10.1.10.1

If you want to communicate with a switch over IP then you use a Switched Virtual Interface, like the one you defined with the "int vlan" command.

The "ip default-gateway" is telling the switch what it's default gateway is. So you need to put the address of the router in there- ip default-gateway 10.1.10.2

I'm not sure if this setup works with a Layer 2 switch. If it won't work then you need to change PC1's default gateway to the router.

fpso

Thanks, that's what I get for staying up all night