Juniper J2300 - USB media not found.
Hi Everyone,
I picked up a Juniper J2300 off ebay. Its old but i thought it would be useful to lab with. My problem is that the USB port does not appear to see a USB device when plugged in. Here is some output below. Any ideas?
root@J2300% dmesg | tail
... stuff removed...
umass0: Generic Mass Storage, rev 2.00/1.01, addr 2
root@J2300% ls /dev/da*
ls: No match.
EDIT More output from the CLI:
root@J2300> show chassis hardware detail
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN006955AA J2300
Routing Engine REV 07 750-009992 AA06138984 RE-J.1
ad0 244 MB 256MB CRR 246601C14A60660005 Compact Flash
usb0 (addr 1) UHCI root hub 0 Intel uhub0
usb0 (addr 2) Mass Storage 25479 Generic umass0
How do I mount that sucker?!
Thanks!
N
I picked up a Juniper J2300 off ebay. Its old but i thought it would be useful to lab with. My problem is that the USB port does not appear to see a USB device when plugged in. Here is some output below. Any ideas?
root@J2300% dmesg | tail
... stuff removed...
umass0: Generic Mass Storage, rev 2.00/1.01, addr 2
root@J2300% ls /dev/da*
ls: No match.
EDIT More output from the CLI:
root@J2300> show chassis hardware detail
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN006955AA J2300
Routing Engine REV 07 750-009992 AA06138984 RE-J.1
ad0 244 MB 256MB CRR 246601C14A60660005 Compact Flash
usb0 (addr 1) UHCI root hub 0 Intel uhub0
usb0 (addr 2) Mass Storage 25479 Generic umass0
How do I mount that sucker?!
Thanks!
N
Comments
-
Node Man
Member Posts: 668 ■■■□□□□□□□
Okedoke. I was able to mount the USB. I experimented with a lot of tinkering. I think preparring the USB did the trick. With a few changes to paths, I used this tutorial:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB10800&actp=METADATA
-
tunerX
Member Posts: 447 ■■■□□□□□□□
You should use vSRX/Firefly or olive. paying money for the old juniper hardware is kind of a waste.