Subnetting
indra26
Member Posts: 10 ■□□□□□□□□□
in CCNA & CCENT
What is problem ? where i am doing wrong
192.168.3.0/27
32-27 = 5
2^5 = 32 block size
192.168.3.0/27
192.168.3.32/27
192.168.3.64/27
192.168.3.96/27
192.168.3.128/27
and
i am getting this on cisco packet tracer
Thanks
192.168.3.0/27
32-27 = 5
2^5 = 32 block size
192.168.3.0/27
192.168.3.32/27
192.168.3.64/27
192.168.3.96/27
192.168.3.128/27
and
i am getting this on cisco packet tracer
Router(config-if)#ip address 192.168.3.24 255.255.255.223
Bad mask 0xFFFFFFDF for address 192.168.3.24
Thanks
Comments
-
stryder144
Member Posts: 1,684 ■■■■■■■■□□
Your subnet mask should read 255.255.255.224, not 255.255.255.223. The three bits you borrowed from the fourth octet are the 128+64+32 bits, which equals 224.The easiest thing to be in the world is you. The most difficult thing to be is what other people want you to be. Don't let them put you in that position. ~ Leo Buscaglia
Connect With Me || My Blog Site || Follow Me -
indra26
Member Posts: 10 ■□□□□□□□□□
Thanks for quick responsestryder144 wrote: »Your subnet mask should read 255.255.255.224, not 255.255.255.223. The three bits you borrowed from the fourth octet are the 128+64+32 bits, which equals 224.
my bad i see
#solved