anything wrong with this 2520
the_return_of_the_Ring
Member Posts: 119
in CCNP
I was doing initial setup for one of my 2520, when the following displayed(I was setting up ip address for a serial port, i dun think it's related the display). Is this router defective?
Loading middle2520-confg ...... [timed out]ed out
Loading cisconet.cfg [timed out]
User Access Verification
Loading middle25.cfg ...... [timed out]>sh ver
Cisco Internetwork O
[timed out]em Software
enable Modify enable password parametersare (C2600-I-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)
middle2520(config)#exit
middle2520#
%SYS-5-CONFIG_I: Configured from console by consoleexit
Loading middle2520-confg ...... [timed out]ed out
Loading cisconet.cfg [timed out]
User Access Verification
Loading middle25.cfg ...... [timed out]>sh ver
Cisco Internetwork O
[timed out]em Software
enable Modify enable password parametersare (C2600-I-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)
middle2520(config)#exit
middle2520#
%SYS-5-CONFIG_I: Configured from console by consoleexit
Comments
-
mikej412
Member Posts: 10,086 ■■■■■■■■■■
I've done password recovery on some of my ebay routers just to see how the previous owners had configured them (if they didn't come wiped)..... it can be interesting.
If you didn't erase the startup config before you started there could be "leftovers." I'm not even going to venture a guess where that C2600-I-M came from.
But if it booted and your at the router prompt -- you're probably fine -- let the lab fun begin!:mike: Cisco Certifications -- Collect the Entire Set!