How Do You Connect a PC to a 2500 Series Router with CAT5 ?

Hello I am new here...

I want to test a refurb 2514 Router to my PC. I do not know what the IP is of the router to use Hyper Terminal.

Would I use a crossover CAT5 cable to connect from my PC's NIC to the Console port on the Router?

How would I find/change the IP to connect to the router?

Thanks,
Sydney

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

Webmaster

Hi and welcome to the forums.

Would I use a crossover CAT5 cable to connect from my PC's NIC to the Console port on the Router?

No, not a crossover but a rollover.

When you connect through the console port you don't connect over IP, so you don't need an IP address. Check out our Hardware TechLab for the basics on how to set up your cables and connections:

www.techexams.net/techlabs/ccna/lab_hardware.shtml

And our CCNA page for more information and goodies:

www.techexams.net/ccna.shtml

Obliged

OK thanks... my problem was trying to connect from the aux directly to the NIC instead of from the Console to the serial port.

Your labs are a great help... thank you so much for your time and effort.

Trailerisf

Great Info for the clueless (like myself)

Thanks.