Options
CSU/DSU connection
bmauro
Member Posts: 307
in CCNA & CCENT
Guys - I want to connect two 2621 via the CSU/DSU T1 card. Would this be similar to piggybacking two serial ports together with a DTE and DCE cable? I made a T1 crossover and am wondering if that would work (providing I supply the clockrate).
Comments
-
Optionsms_visio
Member Posts: 58 ■■□□□□□□□□
bmauro wrote:Guys - I want to connect two 2621 via the CSU/DSU T1 card. Would this be similar to piggybacking two serial ports together with a DTE and DCE cable? I made a T1 crossover and am wondering if that would work (providing I supply the clockrate).
The job of CSU/DSU is to provide clocking to the router actually and i have no clue if your "T1 crossover" will work or not!:study: -
OptionsBubbaJ
Member Posts: 323
I have not tried this myself, but this is how some of the home lab blueprints say to do it. Only supply clocking from one end, and some of the newer WICs require a statement to turn them on before they will accept commands.
-
Options
mikej412
Member Posts: 10,086 ■■■■■■■■■■
See
http://www.techexams.net/forums/viewtopic.php?t=15393
for your timing command (and an idea what to seach for in the Cisco Docs which may point you to an example configuration).:mike: Cisco Certifications -- Collect the Entire Set!