Post Your Lab (PICS)

1…4142444647…49

Comments

  • mgmguy1mgmguy1 Member Posts: 485 ■■■■□□□□□□
    Router #1 1841 256/64
    Router #2 1841 256/64
    Router #3 1841 256/64
    Switch 1 Upgrade: 2950 to 2950C
    Switch 2 Upgrade: 2950 to 2950C
    Switch 3 Upgrade: 2950 to 3550
    Digi-32CM
    I also just bought a Surge Protector for it. ( Not in the Photo)

    Working on getting my Digi CM 32 Working so I can Lab better. Having fun learning thou.

    Studying for
    ICND 1
    ICND 2
    Then CCNA Security.
    "A lot of fellows nowadays have a B.A., M.D., or Ph.D. Unfortunately, they don't have a J.O.B."

    Fats Domino
    · Share on FacebookShare on Twitter
  • discobiscuitsdiscobiscuits Member Posts: 9 ■□□□□□□□□□
    Routing my first packets icon_rolleyes.gif

    IMAG0326.jpg
    · Share on FacebookShare on Twitter
  • JeanMJeanM Member Posts: 1,117
    My latest lab for esxi host/nas/voice

    digi cm32 console server
    3 2950 24t l2 switches
    2520 router (it was nib cheap, couldn't pass up a good deal)
    2x 2621 routers
    2x 2620xm routers
    2x 3550 non poe switches
    2u rack mount nas
    4u rack mount esxi host
    2x 3550 poe voice switches
    2x 2811 isr voice routers
    1x 3725 router
    2x 3640 routers


    jeanm-albums-cisco+-+vmware+lab-picture4976-2014-lab.jpg
    2015 goals - ccna voice / vmware vcp.
    · Share on FacebookShare on Twitter
  • Architect192Architect192 Member Posts: 157 ■■■□□□□□□□
    I'm selling my ASA 5505 if you're interested... Security Plus license, as well as my whole CCIE lab setup...

    Current: VCAP-DCA/DCD, VCP-DCV2/3/4/5, VCP-NV 6 - CCNP, CCNA Security - MCSE: Server Infrastructure 2012 - ITIL v3 - A+ - Security+
    Working on: CCNA Datacenter (2nd exam), Renewing VMware certs...
    · Share on FacebookShare on Twitter
  • TBickleTBickle Member Posts: 110
    The rack that got me through my CCNP studies (minius one 2950 that is out on loan). I've been meaning to buy a Skeletech rack but the shipping prices are outrageous.
    · Share on FacebookShare on Twitter
  • MatroMatro Member Posts: 38 ■■□□□□□□□□
    Uhm... is the second switch a cisco device?
    Actually: CCNA - Palo Alto ACE
    · Share on FacebookShare on Twitter
  • TBickleTBickle Member Posts: 110
    No, it's my terminal server. It's an Avocent Cyclades.
    · Share on FacebookShare on Twitter
  • discobiscuitsdiscobiscuits Member Posts: 9 ■□□□□□□□□□
    Nice only 3 switches was ok for CCNP. Guess only that INE topology i've seen requires 4
    · Share on FacebookShare on Twitter
  • JeanMJeanM Member Posts: 1,117
    TBickle wrote: »
    The rack that got me through my CCNP studies (minius one 2950 that is out on loan). I've been meaning to buy a Skeletech rack but the shipping prices are outrageous.

    I think it was only about $30-40 for s/h on the rack that I got to CA
    2015 goals - ccna voice / vmware vcp.
    · Share on FacebookShare on Twitter
  • late_collisionlate_collision Member Posts: 146
    discobiscuits wrote: »
    Nice only 3 switches was ok for CCNP. Guess only that INE topology i've seen requires 4

    4 really is the better way to go, if you are financially able to do so.
    RFC 1925: The Twelve Networking Truths
    · Share on FacebookShare on Twitter
  • LittleBITLittleBIT Member Posts: 320 ■■■■□□□□□□
    Curious… how bad is your electric bills?? Lmao.
    Kindly doing the needful
    · Share on FacebookShare on Twitter
  • TBickleTBickle Member Posts: 110
    No, I used 4 switches for CCNP study but after I finished my Switch studies (roughly 6-7 months ago) i loaned one of my 2950s to my brother. I definitely suggest getting 4 switches for CCNP Switch lab so that you can at least follow the Cisco Student Lab Manual for CCNP Switch.
    · Share on FacebookShare on Twitter
  • ccie2beccie2be Member Posts: 11 ■□□□□□□□□□
    My home network.



    3 x 2651XM
    1 x 1841
    1 x 2821
    1 x 2611
    3 x 2651 (non-XM)
    2 x 3750
    2 x 3560
    1 x ASA5520
    1 x WTI 16-port TS
    · Share on FacebookShare on Twitter
  • wgroomwgroom Member Posts: 147
    1920338_10201835219351338_438405645_n.jpg

    Late to the game, but here is my lab.

    2 Cisco 2821s, running 15.1, one running CUCME 8.6
    1 Cisco 2611
    1 Cisco 2610
    1 Cisco 3750 L3 PoE
    3 Cisco 3548XLs
    1 Cisco 2950
    1 Dell 1950, 2x 3.0ghz Quad Cores, 16gb RAM, 4x 146gb HDDS running CUCM 8.6, CUCx 8.5, UCCX 8.5, Win2K3 for AD, DNS, DHCP, CentOS Server, and Linux Mint desktop (not all at once!)

    Also in use, 3 laptops, 3 Cisco 7961s, Cisco E3000 wireless router, and Brother MFD-6490. Just yesterday I routed the stack through my E3000, so I am able to work from the recliner while I am reading, lessening the trips to the office for simple commands. Trivial feat, but it excited me.
    Cisco VoIP Engineer I
    CCNA R&S COLOR=#008000]Complete[/COLOR CCNA Voice COLOR=#008000]Complete[/COLOR CCNA Collaboration [In Progress]
    · Share on FacebookShare on Twitter
  • Abdul201288Abdul201288 Member Posts: 32 ■■□□□□□□□□
    My Network Only things which I got were a 3524xl and the Dell PE 2950.

    Specs for the server PE 2950: 2 Quad Core Xeons 3.16 GHz, 32 GB Ram, 6 x 450 GB SAS Drives, 1x Quad port Gigabit Intel NIC. Running ESXi 5.5
    Specs for the server PE 200: Single Dual Core Xeon 3.00 GHz, 4 GB Ram, 250 GB boot drive, 500 GB. Running Windows 2008 R2.

    Also Upgraded the ISP from crappy Plusnet to Virgin Media. icon_cheers.gif speed test at the bottom.

    3392585373.png

    · Share on FacebookShare on Twitter
  • JeanMJeanM Member Posts: 1,117
    Nice, I bet the 2950 server is LOUD!
    2015 goals - ccna voice / vmware vcp.
    · Share on FacebookShare on Twitter
  • Abdul201288Abdul201288 Member Posts: 32 ■■□□□□□□□□
    JeanM wrote: »
    Nice, I bet the 2950 server is LOUD!

    It's sooo loud, I can even hear it from upstairs. ;-; I only turn it on when I want to test some OS. I wan't to change the fans, but I don't to risk messing it up. Or I could end up getting a Tower instead.
    · Share on FacebookShare on Twitter
  • mikeybinecmikeybinec Member Posts: 484 ■■■□□□□□□□
    On the left is a collection of 26XXs and above the monitor are a few 2950s
    Cisco NetAcad Cuyamaca College
    A.S. LAN Management 2010 Grossmont College
    B.S. I.T. Management 2013 National University
    · Share on FacebookShare on Twitter
  • MAC_AddyMAC_Addy Member Posts: 1,740 ■■■■□□□□□□
    Anyone want to buy my rack? Make me an offer :)
    2017 Certification Goals:
    CCNP R/S
    · Share on FacebookShare on Twitter
  • tprice5tprice5 Member Posts: 770
    MAC_Addy wrote: »
    Anyone want to buy my rack? Make me an offer :)

    I think it might be time to update the ole' signature.
    Certification To-Do: CEH [ ], CHFI [ ], NCSA [ ], E10-001 [ ], 70-413 [ ], 70-414 [ ]
    WGU MSISA
    Start Date: 10/01/2014 | Complete Date: ASAP
    All Courses: LOT2, LYT2 , UVC2, ORA1, VUT2, VLT2 , FNV2 , TFT2 , JIT2 , FMV2, FXT2 , LQT2
    · Share on FacebookShare on Twitter
  • Abdul201288Abdul201288 Member Posts: 32 ■■□□□□□□□□
    MAC_Addy wrote: »
    Anyone want to buy my rack? Make me an offer :)


    1p :D My 2651xm died on me. icon_sad.gif Doesn't power up.
    · Share on FacebookShare on Twitter
  • MAC_AddyMAC_Addy Member Posts: 1,740 ■■■■□□□□□□
    Ha, I think shipping might be quite high to send to the ol' blighty.
    2017 Certification Goals:
    CCNP R/S
    · Share on FacebookShare on Twitter
  • JeanMJeanM Member Posts: 1,117
    MAC_Addy wrote: »
    Anyone want to buy my rack? Make me an offer :)

    C28U ? What gives, upgrading?
    2015 goals - ccna voice / vmware vcp.
    · Share on FacebookShare on Twitter
  • MAC_AddyMAC_Addy Member Posts: 1,740 ■■■■□□□□□□
    JeanM wrote: »
    C28U ? What gives, upgrading?
    Oh, you'll see... :) I just want to get rid of this one first before I do anything else.
    2017 Certification Goals:
    CCNP R/S
    · Share on FacebookShare on Twitter
  • HAMPHAMP Member Posts: 163
    As much Cisco searches I have done, I can't believe I found this site after so many times. It only took me reading a few post to know this is a great site, and I had to join. I'm gonna jump right on in and post my rack that I am putting together now. I have a few more things to get.


    · Share on FacebookShare on Twitter
  • MAC_AddyMAC_Addy Member Posts: 1,740 ■■■■□□□□□□
    HAMP wrote: »
    As much Cisco searches I have done, I can't believe I found this site after so many times. It only took me reading a few post to know this is a great site, and I had to join. I'm gonna jump right on in and post my rack that I am putting together now. I have a few more things to get.
    Glad to have you on here! This is a great place to get answers, if you have them, or contribute to helping out others.
    2017 Certification Goals:
    CCNP R/S
    · Share on FacebookShare on Twitter
  • pitviperpitviper Member Posts: 1,376 ■■■■■■■□□□
    HAMP wrote: »
    As much Cisco searches I have done, I can't believe I found this site after so many times. It only took me reading a few post to know this is a great site, and I had to join. I'm gonna jump right on in and post my rack that I am putting together now. I have a few more things to get.

    Welcome to the madness! icon_twisted.gif

    Nice setup you have there - that's how it all starts...and then before you know it you have a full rack of equipment!
    CCNP:Collaboration, CCNP:R&S, CCNA:S, CCNA:V, CCNA, CCENT
    · Share on FacebookShare on Twitter
  • HAMPHAMP Member Posts: 163
    pitviper wrote: »
    Welcome to the madness! icon_twisted.gif

    Nice setup you have there - that's how it all starts...and then before you know it you have a full rack of equipment!

    In my lab I have a 2960 and 3550 switch, and I’m not sure if I should get the 3560 now or get a 2950 and call it a day until I truly need the 3560.

    Routers are 1841, 2801 and 2811.

    I have to get a couple of WIC cards and cables this weekend.
    · Share on FacebookShare on Twitter
  • JeanMJeanM Member Posts: 1,117
    There is no going back now HAMP! lol

    wgroom - I see empty spaces in the rack, you must fill them up ;)

    jeanm-albums-cisco+-+vmware+lab-picture4976-2014-lab.jpg
    2015 goals - ccna voice / vmware vcp.
    · Share on FacebookShare on Twitter
  • wgroomwgroom Member Posts: 147
    LOL, thanks Jean! I am looking for another 3750 to practice HSRP, and would like to find a few 1841s to add to the rack. What I really need right now is a NAS. Currently using a WD 1tb USB drive slaved off the E3000, but I would like to tie a NAS into the ESXi environment.
    Cisco VoIP Engineer I
    CCNA R&S COLOR=#008000]Complete[/COLOR CCNA Voice COLOR=#008000]Complete[/COLOR CCNA Collaboration [In Progress]
    · Share on FacebookShare on Twitter
Sign In or Register to comment.