2610/2950/1900 Lab Setup
mp3spy
Member Posts: 86 ■■□□□□□□□□
in CCNA & CCENT
Any suggestions for a basic Lab setup with these devices.....
Ideas:
Compare 801.1q with 2950 and ISL with 1900, Settings up VLANS/VTP Server. Not sure if the 2950 can be utilized since Router only supports 10 meg ethernet.
I think there is only one E0 port on the 2610, so I may be screwed there. I guess I may need to get an additional router supporting Fast Ethernet...
Ideas....??
Ideas:
Compare 801.1q with 2950 and ISL with 1900, Settings up VLANS/VTP Server. Not sure if the 2950 can be utilized since Router only supports 10 meg ethernet.
I think there is only one E0 port on the 2610, so I may be screwed there. I guess I may need to get an additional router supporting Fast Ethernet...
Ideas....??
Ok CCNA BREAK IS OVER, TIME FOR CCSP!!!
Comments
-
mikej412
Member Posts: 10,086 ■■■■■■■■■■
The 2610 has supported 802.1q trunking on the 10mb interface since 12.2( 8 )T. You can check the Cisco Feature Navigator -- search by feature (and use the search option there), select your feature(s), then see if your platform is an option for that feature -- if so, select it and see the IOS images that support it.:mike: Cisco Certifications -- Collect the Entire Set!