Options
how to make 2600 into voice router?
convenientstore
Member Posts: 53 ■■□□□□□□□□
what do I need to get?
I only have either 2501 or 2612 router at work (I have acess to 5300 but it has ISDN connection and I want to try real phone connected to the fxs port) but I want to setup fxs port setup..
do i need to buy a voice card? which one? what is the cheap solution here?
I only have either 2501 or 2612 router at work (I have acess to 5300 but it has ISDN connection and I want to try real phone connected to the fxs port) but I want to setup fxs port setup..
do i need to buy a voice card? which one? what is the cheap solution here?
Comments
-
Optionsmikej412 Member Posts: 10,086 ■■■■■■■■■■You can get an NM-1V or NM-2V (1 or 2 slots) and then you can look at the VICs to put in them. I've got the 2FXS and 2FSO cards in the NM-2Vs. There are some newer NMs, but I'm not sure if they will work in a plain 26xx.... and you did mention cheap.
And you need an IOS with Telephony support.:mike: Cisco Certifications -- Collect the Entire Set! -
Optionskeenon Member Posts: 1,922 ■■■■□□□□□□if the card is a newer HWIC model card it will not work in the older routers those are only compadible with the newer routers. also the newer routers don't support a majority of the old cardsBecome the stainless steel sharp knife in a drawer full of rusty spoons