B4 I invest again would like to know if.....
HELLZxPHADER
Member Posts: 74 ■■□□□□□□□□
in CCIE
MY current lab consists of...
3550 48 emi $1800
2 x 2950 $650
4 x 2500 maxed $300
2520 maxed $100
4 x 2600 maxed $900
nm-4as $100
nm-4e $100
2 x wict1 $150
2 x wic2t $120
4 x wic1t $120
wic cabling $100
my ccie upgrade plan for r and s consists of...
3550 48 smi $1300
2 x 2801 256/64 $2500
VWIC-2MFT-T1-D1 $150
hWIC-4ESW $175
4 x rom up+32flash $400
4 x WS-G5483 $175
2 x wic2t $120
4 x wic1t $120
wic cabling $75
I would like to know what else needs to be obtained.. atm? diff router?
3550 48 emi $1800
2 x 2950 $650
4 x 2500 maxed $300
2520 maxed $100
4 x 2600 maxed $900
nm-4as $100
nm-4e $100
2 x wict1 $150
2 x wic2t $120
4 x wic1t $120
wic cabling $100
my ccie upgrade plan for r and s consists of...
3550 48 smi $1300
2 x 2801 256/64 $2500
VWIC-2MFT-T1-D1 $150
hWIC-4ESW $175
4 x rom up+32flash $400
4 x WS-G5483 $175
2 x wic2t $120
4 x wic1t $120
wic cabling $75
I would like to know what else needs to be obtained.. atm? diff router?
Comments
-
keenon Member Posts: 1,922 ■■■■□□□□□□you could use 3640s for the ospf ver3 and cut router costs up to 80% or to about 300+ for each with 128/32Become the stainless steel sharp knife in a drawer full of rusty spoons
-
HELLZxPHADER Member Posts: 74 ■■□□□□□□□□I want to stick with the 2800 series, been wanting to get a hold of them for the longest, I hope 2 is enough.
-
MrD Member Posts: 441I use a rack full of 2811's at school and they kick ass. If you can afford em' I'd say go with em', cuz they'll be good for a long time to come.
Like I said I use them at school, cuz I can't even come close to affording them -
Humper Member Posts: 647MrD wrote:I use a rack full of 2811's at school and they kick ass. If you can afford em' I'd say go with em', cuz they'll be good for a long time to come.
Like I said I use them at school, cuz I can't even come close to affording them
Did you pass your CCIE written?Now working full time! -
MrD Member Posts: 441Haven't taken it yet. Was gonna take it today, actually, but I'm in the middle of the internetwork expert class on demand series, and don't want to take it until I'm finished
-
mikej412 Member Posts: 10,086 ■■■■■■■■■■Maybe look at a 3560....
And consider Dynamips/Dynagen on a bulky PC with lots of Network Cards.
But still get the 2800s:mike: Cisco Certifications -- Collect the Entire Set! -
apd123 Member Posts: 171Mr D what do you think of the IE class on demand? I was thinking about going that route when it comes time to start preparing myself.
-
MrD Member Posts: 441It's by far the most detailed training I've come across. Make sure you understand every CCNP fact thoroughly plus some before venturing into this class.
-
wildfire Member Posts: 654I remember reading a warning on Groupstudy about the 2801's feature set missing some components, and that to opt for the 2811, although I cant remeber what it was, I think it was related to BGP for IPv6 and some other things.Looking for CCIE lab study partnerts, in the UK or Online.