Unable to SSH in to Netscreen 5gt

nuglobe

I set up a firewall at work through console. It allows me to use the WebUI but it wont let me SSH in to it. The config is below. Any ideas? I took out the url for the untrusted, so people dont try and mess with it.

set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "ada"
set admin password "nKMsKcr1J85236tCJs9DXFAtL6AT+n"
set admin auth timeout 10
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "MGT" block
set zone "VLAN" block
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface trust phy full 100mb
set interface "trust" zone "Trust"
set interface "untrust" zone "Untrust"
unset interface vlan1 ip
set interface trust ip 192.168.*.*/24
set interface trust route
set interface untrust ip 209.59.*.*/24
set interface untrust route
set interface untrust gateway 209.59.*.*
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface trust ip manageable
set interface untrust ip manageable
set interface untrust manage ping
set interface untrust manage ssh
set interface untrust manage snmp
set interface untrust manage ssl
set interface untrust manage web
set interface trust dhcp server service
set interface trust dhcp server auto
set interface trust dhcp server option gateway 192.168.1.1
set interface trust dhcp server option netmask 255.255.255.0
set interface trust dhcp server ip 192.168.1.33 to 192.168.1.126
set flow tcp-mss
unset flow no-tcp-seq-check
set flow tcp-syn-check
set hostname genshi2

set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set ike respond-bad-spi 1
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set url protocol sc-cpa
exit
set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit
set policy id 1
exit
set global-pro policy-manager primary outgoing-interface untrust
set global-pro policy-manager secondary outgoing-interface untrust
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
set modem speed 115200
set modem retry 3
set modem interval 10
set modem idle-time 10
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit

nuglobe

Really? No ideas?

nuglobe

One last bump, after that I'll let it die if no responses.

nuglobe

Found the issue.

You have to have

set ssh version v2
set ssh enable

Not just

set interface untrust manage ssh