DNSCMD switches and options
georgemc
Member Posts: 429
Hi all,
While studying using MS-PRESS 2nd edition, I came across the following command in a troubleshooting lab, in step 9 on page 4-65:
dnscmd ./Config.AllZones /AllowUpdate 1
No matter what I try, I am unable to get it to work. The AllowUpdate switch keeps coming back as invalid. I've looked it up on Technet and the syntax appears to be right. Any ideas as to what I might be doing wrong?
Georgemc
P.S. I've completed all of the previous practices/labs.
While studying using MS-PRESS 2nd edition, I came across the following command in a troubleshooting lab, in step 9 on page 4-65:
dnscmd ./Config.AllZones /AllowUpdate 1
No matter what I try, I am unable to get it to work. The AllowUpdate switch keeps coming back as invalid. I've looked it up on Technet and the syntax appears to be right. Any ideas as to what I might be doing wrong?
Georgemc
P.S. I've completed all of the previous practices/labs.
WGU BS: Business - Information Technology Management
Start Date: 01 October 2012
QFT1,PFIT in progress.
TRANSFERRED/COMPLETED: AGC1,BBC1,LAE1,QBT1,LUT1,QLC1,QMC1,QLT1,IWC1,INC1,INT1,BVC1,CLC1,MGC1, CWV1 BNC1, LIT1,LWC1,QAT1,WFV1,EST1,EGC1,EGT1,IWT1,MKC1,MKT1,RWT1,FNT1,FNC1, BDC1,TPV1 REQUIRED:
Start Date: 01 October 2012
QFT1,PFIT in progress.
TRANSFERRED/COMPLETED: AGC1,BBC1,LAE1,QBT1,LUT1,QLC1,QMC1,QLT1,IWC1,INC1,INT1,BVC1,CLC1,MGC1, CWV1 BNC1, LIT1,LWC1,QAT1,WFV1,EST1,EGC1,EGT1,IWT1,MKC1,MKT1,RWT1,FNT1,FNC1, BDC1,TPV1 REQUIRED:
Comments
-
dsufrin
Member Posts: 2 ■□□□□□□□□□
Hi Georgemc
I was stuck on the same command in the 70-291 MS Press book. After a bit of digging I found the correct syntax is
dnscmd . /Config ..AllZones /AllowUpdate 1.
Good luck with the exam.
Dan