BSCI 642-901 more questions!

OK, i was trying to get some rest from studying but i'm too excited about getting into the new BSCI studies.
I was wondering if anybody knew what IOS version the lab sim they run on the exam?

Would i be OK running lab with my 2621 routers or i need something better?

more questions, to be continued...

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

DW [banned]

Excellent Choice

NetworkGod

did a little research, answering my own question, maybe some one else will find it helpful to them..

New Required Exams as of August 15, 2005 Exam Topics
642-901 BSCI
Building Scalable Cisco Inter-networks ISR routers, updates to Cisco IOS(R)
Software 12.4 routing protocol, routing authentication security, multicast routing, IPv6
642-812 BCMSN
Building Cisco Multilayer Switched Networks High availability, new wireless LAN fundamentals for
Airespace thin-client, voice, and Cisco IOS switch security
642-825 ISCW
Implementing Secure Converged Wide-Area Networks Cable and DSL broadband access, Multiprotocol Label
Switching (MPLS)/MPLS VPN fundamentals Cisco IOS Security featuring S2S VPN (IPsec and generic routing
encapsulation/IPsec [GRE/IPSEC]), Cisco Easy VPN, Cisco IOS Firewall, Cisco IOS Intrusion Prevention
System (IPS), Cisco AutoSecure, Role-Based CLI Access, and Cisco Security Device Manager (SDM)
642-845 ONT
Optimizing Converged Cisco Networks Voice over IP (VoIP) fundamentals, techniques to address VoIP
challenges, concepts and implementation methods for quality of service (QoS), wireless security
standards, and Cisco wireless LAN (WLAN) networks

optimus

The new book for BSCI uses the 2811. I can't see why yet why you could not use 2621's. You could also take a look at Dynamips and use 7200s. I was able to set up a lab pretty similiar to what they have on page 48 and page 148 using Dynamips and it runs pretty smooth. I also have a couple 2620s, and a few 2950 switches which I like to integrate with Dynampis.

Cheers!

NetworkGod

awesome, i will setup a dynamips lab, what're your dynaPC specs?

srg

optimus wrote:

The new book for BSCI uses the 2811. I can't see why yet why you could not use 2621's. You could also take a look at Dynamips and use 7200s. I was able to set up a lab pretty similiar to what they have on page 48 and page 148 using Dynamips and it runs pretty smooth. I also have a couple 2620s, and a few 2950 switches which I like to integrate with Dynampis.

Cheers!

Which book is that?

NetworkGod

http://www.amazon.com/Building-Scalable-Internetworks-Authorized-Self-Study/dp/1587052237/ref=pd_bbs_sr_1/002-1211877-6991215?ie=UTF8&s=books&qid=1173319738&sr=8-1
by Diane Teare and Catherine something..

i got mine the first week it came out!