oh crud

Darthn3ssDarthn3ss Member Posts: 1,096
in CCNA & CCENT
I got my 3 2924's in yesterday. anyway, i went to power them up and they're password protected. The guy who sold them to me told gave me 2 passwords to try, and i'll do that tommorow, but just incase i can't get into them, how do i reset the password?
Fantastic. The project manager is inspired.

In Progress: 70-640, 70-685
· Share on FacebookShare on Twitter

Comments

  • seraphusseraphus Member Posts: 307
    Piece of cake... :)

    http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • mgeorgemgeorge Member Posts: 774 ■■■□□□□□□□
    If i was you i'd try to save the config off of it so that way you can learn what type of configuration the switch was preforming before it was sold to you :)

    It always helps when exploring new stuff ;)
    There is no place like 127.0.0.1
    · Share on FacebookShare on Twitter
  • Darthn3ssDarthn3ss Member Posts: 1,096
    ooh thanks for the link.

    so i don't have to do ctrl+break, just hit the mdoe button when i power it on?
    Fantastic. The project manager is inspired.

    In Progress: 70-640, 70-685
    · Share on FacebookShare on Twitter
  • sexion8sexion8 Member Posts: 242
    mgeorge27 wrote:
    If i was you i'd try to save the config off of it so that way you can learn what type of configuration the switch was preforming before it was sold to you :)

    It always helps when exploring new stuff ;)

    Funny you should mention... One of my 4500's was doing VLAN's for something in the 30.12.x.x range ;) ... Funny people. I also bought some 1924's that were doing switching for some company doing something with Niagra Falls. How stran9e is that
    "Everything we hear is an opinion, not a fact. Everything we see is a perspective, not the truth." - Marcus Aurelius
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    Darthn3ss wrote:
    ooh thanks for the link.

    so i don't have to do ctrl+break, just hit the mdoe button when i power it on?


    That's what I did when I performed the recovery on my switch 2 weeks ago...
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • Paul BozPaul Boz Member Posts: 2,620 ■■■■■■■■□□
    I usually only buy equipment which has the configs wiped, because I'm going to wind up reloading the OS anyway.
    CCNP | CCIP | CCDP | CCNA, CCDA
    CCNA Security | GSEC |GCFW | GCIH | GCIA
    pbosworth@gmail.com
    http://twitter.com/paul_bosworth
    Blog: http://www.infosiege.net/
    · Share on FacebookShare on Twitter
  • Darthn3ssDarthn3ss Member Posts: 1,096
    the IOS version is 11.2. time for a upgrade!

    but i did get the password off, thanks for the link!
    Fantastic. The project manager is inspired.

    In Progress: 70-640, 70-685
    · Share on FacebookShare on Twitter
  • MrfixitRightMrfixitRight Member Posts: 61 ■■□□□□□□□□
    seraphus wrote:
    Piece of cake... :)

    http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

    Cool link! Good info! :)
    Keyboard not functioning, Press F1 to continue

    Anything that goes up, must come down. Ask any Systems Admin.

    dell.jpg
    · Share on FacebookShare on Twitter
  • Aquabat [banned]Aquabat [banned] Inactive Imported Users Posts: 299
    yea, that happened to me a while back on a couple of switches, but i tried for a minute and the password was CCNAPASSED . most just make it ccna or cisco
    i herd u leik mudkips lol
    · Share on FacebookShare on Twitter
Sign In or Register to comment.