Olive Management?

seraphusseraphus Member Posts: 307
in Juniper
(Networkgod or any other Juniper heads out there)

Can anyone tell me how they manage their olives prior to any configuration?
Is there a way to console in through a term server?


Thanks.
Lab first, ask questions later
· Share on FacebookShare on Twitter

Comments

  • rossonieri#1rossonieri#1 Member Posts: 799 ■■■□□□□□□□
    hello,

    maybe this might help :

    http://www.sidsmokes.com/router.lab.html

    and others :

    http://www.packetmischief.ca/juniper/olive/index.html
    the More I know, that is more and More I dont know.
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    So I'll console into a nic(rendered as an fxp) port.....

    Seems I have jinstall 7.5, and I am destined to get the ELF error...

    hmmmnnnnn icon_scratch.gif
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    Ok, correction.... I need crossover or rollover serial cables, then connect
    them from the access server port(s) to the serial port(s) of the motherboard(s)
    on the Olive....

    (still thinking icon_scratch.gif )
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • rossonieri#1rossonieri#1 Member Posts: 799 ■■■□□□□□□□
    seraphus wrote:
    Ok, correction.... I need crossover or rollover serial cables, then connect
    them from the access server port(s) to the serial port(s) of the motherboard(s)
    on the Olive....

    (still thinking icon_scratch.gif )

    do you have the terminal server?
    you need crossover to the serial port.
    read well the document --

    ross.
    the More I know, that is more and More I dont know.
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    rossonieri#1 wrote:
    seraphus wrote:
    Ok, correction.... I need crossover or rollover serial cables, then connect
    them from the access server port(s) to the serial port(s) of the motherboard(s)
    on the Olive....

    (still thinking icon_scratch.gif )

    do you have the terminal server?
    you need crossover to the serial port.
    read well the document --

    ross.

    Your right, thanks. My term serv is a Cisco 2511.
    It seems I'll have to come up with another option. At this
    time, I'm still waiting on my NICs to arrive.
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    I'm also waiting for my cases to arrive. Got a butt load of spare parts.

    I'll start with two, rack mounted.... (that JNCIS must be achieved) icon_twisted.gif
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • rossonieri#1rossonieri#1 Member Posts: 799 ■■■□□□□□□□
    good luck then ;)
    the More I know, that is more and More I dont know.
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    rossonieri#1 wrote:
    good luck then ;)

    Indeed! And thanks for the links!
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
  • NetworkGodNetworkGod Member Posts: 236 ■■■□□□□□□□
    Gah, what's going on here, i been sick for a while! But finally back :)
    What one man can do another can do.

    (\__/)This is Bunny. Copy and paste bunny into
    (='.'=)your signature to help him gain world
    (")_(")domination.

    - CCNA - CCDA - BCMSN - BSCI -
    - 70-270 -
    · Share on FacebookShare on Twitter
  • seraphusseraphus Member Posts: 307
    Welcome back then!

    Not too much. I have what's going to be my Olive
    built. I plan to install JUNOS on it at some point this week...
    after I finish this homework.
    Lab first, ask questions later
    · Share on FacebookShare on Twitter
Sign In or Register to comment.