What else should I get?

rpoggerpogge Member Posts: 8 ■□□□□□□□□□
in CCNA & CCENT
I have purchased the following for my CCNA Lab thus far:

2 x 2610 w/ 1 WIC-1T each.
1 x 2509

1 x 2950
1 x 2924

I have about 200$ left to spend.
What else would you all recomend to cover all topics on CCNA, and then be able to build upon for CCNP... $200 or less.

Thanks,
Ryan
· Share on FacebookShare on Twitter

Comments

  • markzabmarkzab Member Posts: 619
    rpogge wrote:
    I have purchased the following for my CCNA Lab thus far:

    2 x 2610 w/ 1 WIC-1T each.
    1 x 2509

    1 x 2950
    1 x 2924

    I have about 200$ left to spend.
    What else would you all recomend to cover all topics on CCNA, and then be able to build upon for CCNP... $200 or less.

    Thanks,
    Ryan

    You've got 3 routers so you might as well get 3 switches. You're going to have just about the same set-up I do. I've got a 2612, 2509, 2610, and 2521(FR switch) for my routers. And then I've got a 2950, 2924, and 2912 for my switches. With 3 switches you'll be able to play with loops a lot easier. My suggestion would be to grab a 2912 or 2924,l whichever you can find cheaper.
    "You, me, or nobody is gonna hit as hard as life. But it ain't how hard you hit; it's about how hard you can get hit, and keep moving forward. How much you can take, and keep moving forward. That's how winning is done!" - Rocky
    · Share on FacebookShare on Twitter
  • kafifi13kafifi13 Member Posts: 259
    Even though i haven't built my lab just yet i would have suggested the same thing based on Info that Mark gave me before. You'll at least be able to play with STP.
    · Share on FacebookShare on Twitter
  • rpoggerpogge Member Posts: 8 ■□□□□□□□□□
    thanks for the advice guys.
    I just picked up another 2924.

    I also ordered 2 x 1 foot serial cables as mark did (read your lab thread)
    I have a handfull of rollover cables from work.
    I have 1 serial transciever from work.

    What else can you think of cablewise that I will need? Probably another serial transciver eh ?
    Oh and the 2509 is the RJ version, It uses individual rollover cables, so no need for an octopus cable.

    I still have $100 left

    Should I go for a 2521 for FR ?

    Oh forgot to add I also have a PIX 501 ... not that that has anythign to do with CCNA.
    · Share on FacebookShare on Twitter
  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    rpogge wrote:
    Should I go for a 2521 for FR ?
    Yeah -- I was going to suggest that, and the 3rd switch. :D
    :mike: Cisco Certifications -- Collect the Entire Set!
    · Share on FacebookShare on Twitter
  • rpoggerpogge Member Posts: 8 ■□□□□□□□□□
    cool, now lets see if i can get a 2521 for < $100 :)

    *edit - yep got one for $40 :)

    so .. i still got 60 bucks left over ... hmm rack for the gear, or ... beer?
    vote?!

    Wait let me qualify that question a bit more, I have a REALY big desk :)
    · Share on FacebookShare on Twitter
  • markzabmarkzab Member Posts: 619
    rpogge wrote:
    cool, now lets see if i can get a 2521 for < $100 :)

    *edit - yep got one for $40 :)

    so .. i still got 60 bucks left over ... hmm rack for the gear, or ... beer?
    vote?!

    Wait let me qualify that question a bit more, I have a REALY big desk :)

    If you saw my drunken post from last night you'll understand why I say not to spend it on liquor...it's evil. icon_wink.gif

    Just make sure you've got all the cables you need. You're going to need more dte/dce cables with that frame switch because it's got 4 serial ports.
    "You, me, or nobody is gonna hit as hard as life. But it ain't how hard you hit; it's about how hard you can get hit, and keep moving forward. How much you can take, and keep moving forward. That's how winning is done!" - Rocky
    · Share on FacebookShare on Twitter
  • kafifi13kafifi13 Member Posts: 259
    Did you just buy everything off Ebay?
    · Share on FacebookShare on Twitter
  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    rpogge wrote:
    I have 1 serial transciever from work.
    Did you mean Ethernet Transceiver -- the DB15 to RJ-45 convert for the AUI port on the 2509?

    I'd hold off on the beer until you're sure you have all the adapters, accessories, and cables -- it seems like there's always something you forget to buy.
    :mike: Cisco Certifications -- Collect the Entire Set!
    · Share on FacebookShare on Twitter
  • rpoggerpogge Member Posts: 8 ■□□□□□□□□□
    kafifi13 wrote:
    Did you just buy everything off Ebay?

    Mostly.
    · Share on FacebookShare on Twitter
  • rpoggerpogge Member Posts: 8 ■□□□□□□□□□
    markzab wrote:
    Just make sure you've got all the cables you need. You're going to need more dte/dce cables with that frame switch because it's got 4 serial ports.

    How many dte/dce do I need total for my setup do you think?
    I haven't even begun to figure out how to physicaly hook everything together yet.
    · Share on FacebookShare on Twitter
  • markzabmarkzab Member Posts: 619
    rpogge wrote:
    markzab wrote:
    Just make sure you've got all the cables you need. You're going to need more dte/dce cables with that frame switch because it's got 4 serial ports.

    How many dte/dce do I need total for my setup do you think?
    I haven't even begun to figure out how to physicaly hook everything together yet.

    I'd normally help answer this question but I'm hung over and it';s hurting my head thinking numbers and set-ups. I'm gonna have to take a step back on this oen bud. I'm sure mike or someone else will answer. icon_wink.gif
    "You, me, or nobody is gonna hit as hard as life. But it ain't how hard you hit; it's about how hard you can get hit, and keep moving forward. How much you can take, and keep moving forward. That's how winning is done!" - Rocky
    · Share on FacebookShare on Twitter
  • rpoggerpogge Member Posts: 8 ■□□□□□□□□□
    DarbyWeaver wrote:
    You are quick.


    Yes, yes I am.
    I do apreciate the offer though.

    I think I have everythign I need now.
    Yay!
    · Share on FacebookShare on Twitter
  • ishgotbikeishgotbike Member Posts: 23 ■□□□□□□□□□
    Dont mean to add on the subject, but can we have a "Lab suggestions" post. It would be really helpful as this post is for viewers like myself.
    Ish
    To improve is to change; to perfect is to change often.

    CCNP: Switch [x ] Route [ ] T-Shoot [ ]
    · Share on FacebookShare on Twitter
  • markzabmarkzab Member Posts: 619
    ishgotbike wrote:
    Dont mean to add on the subject, but can we have a "Lab suggestions" post. It would be really helpful as this post is for viewers like myself.

    Go look in the FAQ. There is a lab suggestion section right in there. You could do a search and find a ton in this forum as well.
    "You, me, or nobody is gonna hit as hard as life. But it ain't how hard you hit; it's about how hard you can get hit, and keep moving forward. How much you can take, and keep moving forward. That's how winning is done!" - Rocky
    · Share on FacebookShare on Twitter
  • Deadmaster200Deadmaster200 Member Posts: 145
    If you don't mind my asking, how were you able to get a 2521 for only 40 dollars??
    www.barbellpurist.com
    · Share on FacebookShare on Twitter
  • markzabmarkzab Member Posts: 619
    Deadmaster200 wrote:
    If you don't mind my asking, how were you able to get a 2521 for only 40 dollars??

    DM, check on ebay. Darby is sending me one pretty cheap as well and just to make sure he wasn't scheming (crazy networkers) I double-checked on ebay. This was 2 days ago and I saw them for around 40 up to 75 I believe...

    Actually, go grab it right now... http://search.ebay.com/cisco-2521_W0QQfromZR40

    $35 Buy it Now. :D
    "You, me, or nobody is gonna hit as hard as life. But it ain't how hard you hit; it's about how hard you can get hit, and keep moving forward. How much you can take, and keep moving forward. That's how winning is done!" - Rocky
    · Share on FacebookShare on Twitter
  • Deadmaster200Deadmaster200 Member Posts: 145
    Thanks Mark.

    Unfortunately, it is hard to find international friendly auctions on Ebay. This dude will only accept a wire transfer, which the costs for that alone will equal or end up even higher than the router itself, plus shipping will probably be at least 50 dollars.

    No thanks.

    Appreciate the post though Mark.
    www.barbellpurist.com
    · Share on FacebookShare on Twitter
Sign In or Register to comment.