Options
Help me! My 2610 needs some help!!!!
jahman182
Member Posts: 51 ■■□□□□□□□□
in CCNA & CCENT
I am preparing myself for an assault on the CCNA in a couple months, and went ahead and bought some used equipment, routers and switches after much reading and research here on this site (Home away from home, I just get lost in here for hours it is like a candy store) for some hands on practice.
So here is the deal on the used 2610 I received a couple of days ago.........I decided to check it out to see whats cookin' with the unit and this is what I get after bootstrap loaded...............no CLI.
It keeps giving me "Press return to get stared" over and over again. Below is details of what I keep getting.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xa669a4
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################################### [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
000091 0X00092280 C2600 single Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00396E30
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 4Mb.
Using 8 percent iomem. [4Mb/48Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(6c), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 02-Feb-02 01:25 by pwade
Image text-base: 0x80008088, data-base: 0x81210A0C
Compliance with U.S. Export Laws and Regulations - Encryption
This product performs encryption and is regulated for export
by the U.S. Government.
This product is not authorized for use by persons located
outside the United States and Canada that do not have prior
approval from Cisco Systems, Inc. or the U.S. Government.
This product may not be exported outside the U.S. and Canada
either by physical or electronic means without PRIOR approval
of Cisco Systems, Inc. or the U.S. Government.
Persons outside the U.S. and Canada may not re-export, resell,
or transfer this product by either physical or electronic means
without prior approval of Cisco Systems, Inc. or the U.S.
Government.
cisco 2610 (MPC860) processor (revision 0x203) with 45056K/4096K bytes of memory
.
Processor board ID JAD04350N17 (1396297340)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
isdn switch-type basic-ni
^
% Invalid input detected at '^' marker.
isdn voice-call-failure 0
^
% Invalid input detected at '^' marker.
interface Serial0/0
^
% Invalid input detected at '^' marker.
description 768 KB FRAME-RELAY Circuit to Baltimore
^
% Invalid input detected at '^' marker.
bandwidth 768
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
encapsulation frame-relay IETF
^
% Invalid input detected at '^' marker.
no fair-queue
^
% Invalid input detected at '^' marker.
service-module t1 timeslots 1-12
^
% Invalid input detected at '^' marker.
frame-relay lmi-type cisco
^
% Invalid input detected at '^' marker.
interface Serial0/0.1 point-to-point
^
% Invalid input detected at '^' marker.
description 768 KB Circuit to ATT_ROUTER1 AT&T Circuit ID DTEC810521
^
% Invalid input detected at '^' marker.
bandwidth 768
^
% Invalid input detected at '^' marker.
ip address 172.17.20.102 255.255.255.252
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
frame-relay interface-dlci 20 IETF
^
% Invalid input detected at '^' marker.
interface Serial0/0.2 point-to-point
^
% Invalid input detected at '^' marker.
description 768 KB Circuit to ATT_ROUTER2 AT&T Circuit ID DTEC810521
^
% Invalid input detected at '^' marker.
bandwidth 768
^
% Invalid input detected at '^' marker.
ip address 172.17.30.102 255.255.255.252
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
frame-relay interface-dlci 30 IETF
^
% Invalid input detected at '^' marker.
interface Serial0/0.3 point-to-point
^
% Invalid input detected at '^' marker.
description 384 KB Circuit to DR AT&T Circuit ID DCEC.999835
^
% Invalid input detected at '^' marker.
bandwidth 1
^
% Invalid input detected at '^' marker.
ip address 172.17.50.102 255.255.255.252
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
frame-relay interface-dlci 50 IETF
^
% Invalid input detected at '^' marker.
interface BRI0/0
^
% Invalid input detected at '^' marker.
description Backup ISDN to Owings Mills ATT2
^
% Invalid input detected at '^' marker.
bandwidth 64
^
% Invalid input detected at '^' marker.
ip address 172.17.62.109 255.255.255.0
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
encapsulation ppp
^
% Invalid input detected at '^' marker.
dialer idle-timeout 30
^
% Invalid input detected at '^' marker.
dialer wait-for-carrier-time 60
^
% Invalid input detected at '^' marker.
dialer string 14105590900
^
% Invalid input detected at '^' marker.
dialer string 14106492199
^
% Invalid input detected at '^' marker.
dialer load-threshold 200 outbound
^
% Invalid input detected at '^' marker.
dialer-group 1
^
% Invalid input detected at '^' marker.
isdn switch-type basic-ni
^
% Invalid input detected at '^' marker.
isdn spid1 70433448210101 3344821
^
% Invalid input detected at '^' marker.
isdn spid2 70433464910101 3346491
^
% Invalid input detected at '^' marker.
ppp authentication chap
^
% Invalid input detected at '^' marker.
ppp multilink
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
00:00:11: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to up
00:00:13: %IPRT-4-ROUTECOUNTNEGATIVE: IP route counter negative - Default-IP-Rou
ting-Table, 10.49.0.0 Attempt: 1
-Process= "IP Background", ipl= 0, pid= 36
-Traceback= 804D41E8 804C765C 804C77A4 804C7CF0 804C59B0 803BF758
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to down
00:00:20: %SYS-5-CONFIG_I: Configured from memory by console
00:00:24: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(6c), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 02-Feb-02 01:25 by pwade
00:00:24: %SNMP-5-COLDSTART: SNMP agent on host NCCHA2-RTR is undergoing a cold
start
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
Press RETURN to get started!
00:00:11: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to up
00:00:13: %IPRT-4-ROUTECOUNTNEGATIVE: IP route counter negative - Default-IP-Rou
ting-Table, 10.49.0.0 Attempt: 1
-Process= "IP Background", ipl= 0, pid= 36
-Traceback= 804D41E8 804C765C 804C77A4 804C7CF0 804C59B0 803BF758
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to down
00:00:20: %SYS-5-CONFIG_I: Configured from memory by console
00:00:24: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(6c), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 02-Feb-02 01:25 by pwade
00:00:24: %SNMP-5-COLDSTART: SNMP agent on host NCCHA2-RTR is undergoing a cold
start
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
00:03:09: %AAAA-3-DROPACCTSNDFAIL: accounting record dropped,send to server fail
ed: system-start
Could someone assist me with figuring out what is going on with this thing and what I need to do to get back to basics.
So here is the deal on the used 2610 I received a couple of days ago.........I decided to check it out to see whats cookin' with the unit and this is what I get after bootstrap loaded...............no CLI.
It keeps giving me "Press return to get stared" over and over again. Below is details of what I keep getting.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xa669a4
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################################### [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
000091 0X00092280 C2600 single Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00396E30
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 4Mb.
Using 8 percent iomem. [4Mb/48Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(6c), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 02-Feb-02 01:25 by pwade
Image text-base: 0x80008088, data-base: 0x81210A0C
Compliance with U.S. Export Laws and Regulations - Encryption
This product performs encryption and is regulated for export
by the U.S. Government.
This product is not authorized for use by persons located
outside the United States and Canada that do not have prior
approval from Cisco Systems, Inc. or the U.S. Government.
This product may not be exported outside the U.S. and Canada
either by physical or electronic means without PRIOR approval
of Cisco Systems, Inc. or the U.S. Government.
Persons outside the U.S. and Canada may not re-export, resell,
or transfer this product by either physical or electronic means
without prior approval of Cisco Systems, Inc. or the U.S.
Government.
cisco 2610 (MPC860) processor (revision 0x203) with 45056K/4096K bytes of memory
.
Processor board ID JAD04350N17 (1396297340)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
isdn switch-type basic-ni
^
% Invalid input detected at '^' marker.
isdn voice-call-failure 0
^
% Invalid input detected at '^' marker.
interface Serial0/0
^
% Invalid input detected at '^' marker.
description 768 KB FRAME-RELAY Circuit to Baltimore
^
% Invalid input detected at '^' marker.
bandwidth 768
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
encapsulation frame-relay IETF
^
% Invalid input detected at '^' marker.
no fair-queue
^
% Invalid input detected at '^' marker.
service-module t1 timeslots 1-12
^
% Invalid input detected at '^' marker.
frame-relay lmi-type cisco
^
% Invalid input detected at '^' marker.
interface Serial0/0.1 point-to-point
^
% Invalid input detected at '^' marker.
description 768 KB Circuit to ATT_ROUTER1 AT&T Circuit ID DTEC810521
^
% Invalid input detected at '^' marker.
bandwidth 768
^
% Invalid input detected at '^' marker.
ip address 172.17.20.102 255.255.255.252
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
frame-relay interface-dlci 20 IETF
^
% Invalid input detected at '^' marker.
interface Serial0/0.2 point-to-point
^
% Invalid input detected at '^' marker.
description 768 KB Circuit to ATT_ROUTER2 AT&T Circuit ID DTEC810521
^
% Invalid input detected at '^' marker.
bandwidth 768
^
% Invalid input detected at '^' marker.
ip address 172.17.30.102 255.255.255.252
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
frame-relay interface-dlci 30 IETF
^
% Invalid input detected at '^' marker.
interface Serial0/0.3 point-to-point
^
% Invalid input detected at '^' marker.
description 384 KB Circuit to DR AT&T Circuit ID DCEC.999835
^
% Invalid input detected at '^' marker.
bandwidth 1
^
% Invalid input detected at '^' marker.
ip address 172.17.50.102 255.255.255.252
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
ip pim sparse-dense-mode
^
% Invalid input detected at '^' marker.
frame-relay interface-dlci 50 IETF
^
% Invalid input detected at '^' marker.
interface BRI0/0
^
% Invalid input detected at '^' marker.
description Backup ISDN to Owings Mills ATT2
^
% Invalid input detected at '^' marker.
bandwidth 64
^
% Invalid input detected at '^' marker.
ip address 172.17.62.109 255.255.255.0
^
% Invalid input detected at '^' marker.
ip directed-broadcast
^
% Invalid input detected at '^' marker.
encapsulation ppp
^
% Invalid input detected at '^' marker.
dialer idle-timeout 30
^
% Invalid input detected at '^' marker.
dialer wait-for-carrier-time 60
^
% Invalid input detected at '^' marker.
dialer string 14105590900
^
% Invalid input detected at '^' marker.
dialer string 14106492199
^
% Invalid input detected at '^' marker.
dialer load-threshold 200 outbound
^
% Invalid input detected at '^' marker.
dialer-group 1
^
% Invalid input detected at '^' marker.
isdn switch-type basic-ni
^
% Invalid input detected at '^' marker.
isdn spid1 70433448210101 3344821
^
% Invalid input detected at '^' marker.
isdn spid2 70433464910101 3346491
^
% Invalid input detected at '^' marker.
ppp authentication chap
^
% Invalid input detected at '^' marker.
ppp multilink
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
00:00:11: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to up
00:00:13: %IPRT-4-ROUTECOUNTNEGATIVE: IP route counter negative - Default-IP-Rou
ting-Table, 10.49.0.0 Attempt: 1
-Process= "IP Background", ipl= 0, pid= 36
-Traceback= 804D41E8 804C765C 804C77A4 804C7CF0 804C59B0 803BF758
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to down
00:00:20: %SYS-5-CONFIG_I: Configured from memory by console
00:00:24: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(6c), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 02-Feb-02 01:25 by pwade
00:00:24: %SNMP-5-COLDSTART: SNMP agent on host NCCHA2-RTR is undergoing a cold
start
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
Press RETURN to get started!
00:00:11: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to up
00:00:13: %IPRT-4-ROUTECOUNTNEGATIVE: IP route counter negative - Default-IP-Rou
ting-Table, 10.49.0.0 Attempt: 1
-Process= "IP Background", ipl= 0, pid= 36
-Traceback= 804D41E8 804C765C 804C77A4 804C7CF0 804C59B0 803BF758
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed s
tate to down
00:00:20: %SYS-5-CONFIG_I: Configured from memory by console
00:00:24: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(6c), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 02-Feb-02 01:25 by pwade
00:00:24: %SNMP-5-COLDSTART: SNMP agent on host NCCHA2-RTR is undergoing a cold
start
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
This system is to accessed by authorized personnel. Any unauthorized
use of the system is unlawful, and may be subject to civil and/or
criminal penalties. Use of the system may be logged or monitored
without further notice, and the resulting logs may be used as evidence
in court.
NCCHA2-RTR con0 is now available
Press RETURN to get started.
00:03:09: %AAAA-3-DROPACCTSNDFAIL: accounting record dropped,send to server fail
ed: system-start
Could someone assist me with figuring out what is going on with this thing and what I need to do to get back to basics.
Comments
-
Options
dtlokee
Member Posts: 2,378 ■■■■□□□□□□
Password recover the router, steal any passwords from it and blackmail the company it came from
One would think people would clear the configs before they sell gear, it's good to see they stripped all the WIC's out before they sold it
Just do what Mikeeo said, the router is trying to contact an AAA server and when it fails it **** you back out to the press return to get started prompt.
Search for "cisco router password recovery" on your favorite search engine and you should be all set.The only easy day was yesterday! -
Options
hectorjhrdz
Member Posts: 127
yeah, it seems like they were using Tacacs o Radius auth, and forgot to add the Local entry for
username & passwd, o they could've skiped it
that's,pass recovery -
Optionsjahman182
Member Posts: 51 ■■□□□□□□□□
Thank you all I knew I could rely on you for the answers. I will a happy camper soon, unless I mess something up. I will update you all on how it went.
-
Options
mgeorge
Member Posts: 774 ■■■□□□□□□□
This happens when the TACACS+ Server cannot be contacted, it will automatically timeout and just go back to the banner screen. If you want try to boot into rommon and save the config file, cuz those are very handy to have to look at and learn later on down the road, but after its saved, erase the config and reboot it
then wah-lah!! There is no place like 127.0.0.1