Casing the joint...

Cessation

Does anyone know of any sites to find some good case studies.
I have my routers and switches:
2501
2503
2514
2516
2520
and
3524 x 2 switches.

I guess I could try to make them up but i dont think im the most creative.

I tried to search for passed posted info but came up with nothing really.
Looking to test Sept 29 or Oct 6th depending.

Thanks!

Darthn3ss

you could buy the lab manuals that come with cisco's INTRO and ICND books.

tech-airman

Cessation wrote:

Does anyone know of any sites to find some good case studies.
I have my routers and switches:
2501
2503
2514
2516
2520
and
3524 x 2 switches.

I guess I could try to make them up but i dont think im the most creative.

I tried to search for passed posted info but came up with nothing really.
Looking to test Sept 29 or Oct 6th depending.

Thanks!

Cessation,

Design and build a network for your house with internet access.

networker050184

Design and build a network for your house with internet access.

My thoughts exactley. When I do labs I usually come up with them myself, or lab up something to improve upon an existing network.

Darthn3ss

thats what i want to do but i want to pick up another 2620 or 2621 and another 2950 before i do all that :-d

networker050184

That many routers is over kill for the CCNA in my opinion but I guess you can never have to many. Also have you looked into dynamips? Will save you a load of cash.

Darthn3ss

so does anyone happen to know if using my 2620 (1 fast ethernet int) trunked to a 2924 will be a particularly bad idea? What i'd probably do is setup 2 vlans and go from the cable modem to the switch for internet, and then on the 2nd vlan i'd put all my hosts on that network? my only other option is a 2514 with 2 ethernet interfaces,but then wouldn't i only get 10mb internally?