Dynamips noob
dredlord
Member Posts: 172
in CCNA & CCENT
Hellow everyone, I have just started using the lovely application that is dynamips (much BETTER then booson hehe) Can anyone point me to some good tutorials on how to use it. For example how do you simulate a pc connected to f0/0 interface??
Comments
-
Netstudent
Member Posts: 1,693 ■■■□□□□□□□
There is no place like 127.0.0.1 BUT 209.62.5.3 is my 127.0.0.1 away from 127.0.0.1!
-
mrj
Member Posts: 85 ■■□□□□□□□□
-
elvant
Member Posts: 56 ■■□□□□□□□□
You need vpcs to emulate pc. Please nnote that dynamips do not support ISDN (anyway, not in the exam) and switch ios, you still need boson or routersim for the switch labs.
This is the slot support list, you will need it.
7200 (7206 only)
Chassis type:
- STD
- VXR
NPE:
- npe-100
- npe-150
- npe-175
- npe-200
- npe-225
- npe-300
- npe-400
- npe-g1
- npe-g2
Cards:
- C7200-IO-FE (FastEthernet, slot 0 only)
- C7200-IO-2FE (FastEthernet, 2 ports, slot 0 only)
- C7200-IO-GE (GigabitEthernet, slot 0 only)
- PA-FE-TX (FastEthernet)
- PA-2FE-TX (FastEthernet, 2 ports)
- PA-4E (Ethernet, 4 ports)
- PA-8E (Ethernet, 8 ports)
- PA-4T+ (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)
- PA-POS-OC3 (POS)
- PA-GE (GigabitEthernet)
===========
3660
3640
3620
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernet switch module, 16 ports)
- NM-4T (Serial, 4 ports)
- Leopard-2FE (Cisco 3660 FastEthernet in slot 0, automatically used)
===========
2691
3725
3745
Cards:
- NM-1FE-TX (FastEthernet, 1 port)
- NM-4T (Serial, 4 ports)
- NM-16ESW (Ethernet switch module, 16 ports)
- GT96100-FE (2 integrated ports, automatically used)
===========
2610
2611
2620
2621
2610XM
2620XM
2621XM
2650XM
2651XM
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernet switch module, 16 ports)What is done is done, what yet to be done will be done. While in the process of doing, enjoy it.