CSU/DSU

Ok so I have two 1700 routers. Each have only one fastethernet port as well as one csu/dsu card for t1 connections. I am trying to configure the csu/dsu port to basically work as if i am using a dce/dte. I have no idea if this would work, after some playing around I don't think it will but i figured better safe to ask then never know.

thanks

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

dtlokee

If you're trying to connect them back to back you will need a T-1 crossover cable:

R1        R2
1    -    4
2    -    5
4    -    1
5    -    2

You can make one yourself or there are sites where you can buy one.

Auvii

I see, currently I am using a normal cat5 crossover with pins 1-2 swapped with 3-6. So a T1 crossover is different then?

rossonieri#1

hi,

try this for the wiring :
http://www.certforums.co.uk/forums/archive/index.php?t-13943.html

and this for the configuration :
http://www.cisco.com/warp/public/471/52.html

HTH.

Auvii

much help, thanks!