Frame Relay Physical Connection
deviantlifex
Member Posts: 7 ■□□□□□□□□□
in CCNP
Hey whatsup guys, my co-worker and I are debating on how to setup the physical frame-relay connection for a new lab. Using 4 routers. 3 outer laying routers and 1 in the middle as FR switch.
We have 4 routers each with a T1 interface card.
Now we need to know whether we could simulate a frame relay connection between 3 routers and 1 router in the middle as the FR switch using 3 T1 interfaces on the FR switch in the middle and 1 T1 card in each other router connecting straight to the FR switch.
OR
would is be better using a WIC-1T card on 3 routers connecting to a FR switch in the middle with a NM-8A/S card.
We have 4 routers each with a T1 interface card.
Now we need to know whether we could simulate a frame relay connection between 3 routers and 1 router in the middle as the FR switch using 3 T1 interfaces on the FR switch in the middle and 1 T1 card in each other router connecting straight to the FR switch.
OR
would is be better using a WIC-1T card on 3 routers connecting to a FR switch in the middle with a NM-8A/S card.
Comments
-
mikej412
Member Posts: 10,086 ■■■■■■■■■■
This is a Certification Forum, not a help desk. If you need an immediate answer to your question, get a Cisco Support Contract and call TAC.
If you post a question, give the members here a chance to respond. This isn't a chat room and people don't sit here all day waiting to answer your question.
You now have 3 posts for the same question
http://www.techexams.net/forums/viewtopic.php?t=28780
http://www.techexams.net/forums/viewtopic.php?t=28772:mike: Cisco Certifications -- Collect the Entire Set!
This discussion has been closed.