isdn pri and wan
antonyice1
Member Posts: 16 ■□□□□□□□□□
hi guys
could some one send me isdn pri (30 channel) configuration and its associated dialpeer configurations.also it would be really great if some one could send me the configuration of E1 wan connection and its associated dialpeers.
could some one send me isdn pri (30 channel) configuration and its associated dialpeer configurations.also it would be really great if some one could send me the configuration of E1 wan connection and its associated dialpeers.
Comments
-
dtlokee
Member Posts: 2,378 ■■■■□□□□□□
The configu would all depend on what you're trying to do. If it's simply a matter of configuring the trunk set the switch type and configure the pri-group on the controller and continue on with the dial peer commands, if you need to do digit manipulation then you will need to do some additional configuration.The only easy day was yesterday! -
mikej412
Member Posts: 10,086 ■■■■■■■■■■
Here's some links with some configurations. But without knowing what you what to do and what equipment you have to configure, it's hard to guess what your really looking for (but hopefully it isn't answers to a homework assignment
).
Configuring ISDN PRI and Other Signaling on E1 and T1 Lines
Configuring 1- and 2-Port T1/E1 Multiflex Voice/WAN Interface Cards on Cisco 2600 and 3600 Series Routers:mike: Cisco Certifications -- Collect the Entire Set!