IEWB 4.0 3620 2x NM-4T FR config

mgeorge

Well I figured I'd post this if any one else uses a 3620 with 2x NM-4T's for frame relay.
Will also work with 2x NM-8A/S (just gotta change the clock rates)

Config is made to work with the Internetwork Expert Workbook 4 R&S

www.freewebs.com/whiteice27/iewbfr.txt

Darthn3ss

ÿûÿûÿýÿý
                    ############################
                    #     MG's CCIE R&S LAB    #
####################################################################
#                                                                  #
#  This CCIE Lab belongs to Matthew George                         #
#  If you do not have express permission to access this lab        #
#  Then exit now.                                                  #
#                                                                  #
#  This lab is currently configured to the IEWB specifications     #
#                                                                  #
#  To login, please use the provided credentials                   #
#  For assistance, please contact;                                 #
#                                                                  #
#              Matt George - [email]rhgeorge@bellsouth.net[/email]                #
#                                                                  #
####################################################################


User Access Verification

Username: GET /iewbfr.txt HTTP/1.1
Password: 
% Login invalid

Username: User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.$ Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1         .11) Geck.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.11) Gecko         /20071127s; U; Windows NT 5.1; en-US; rv:1.8.1.11) Gecko/20071127          Firefox/2ows NT 5.1; en-US; rv:1.8.1.11) Gecko/20071127 Firefox/2.         0.0.11 Cr; en-US; rv:1.8.1.11) Gecko/20071127 Firefox/2.0.0.11 Cre         ative ZENv:1.8.1.11) Gecko/20071127 Firefox/2.0.0.11 Creative ZENc         ast v1.02) Gecko/20071127 Firefox/2.0.0.11 Creative ZENcast v1.02.         10
Password: 
% Login invalid

Username: Accept-Language: en-us,en;q=0.5
Password: 
% Login invalid

mgeorge

Sorry bout that hadda change port forwarding one night to my ccie rack on port 80,
the place i was at didnt allow any other ports but 80 to get out and i wanted to study.

I changed where it was being hosted at, should work fine now

mgeorge

If any one needs the config for a NM-8A/S let me know and i will post it as well for IEWB 4.10