callmanager and NTP
antonyice1
Member Posts: 16 ■□□□□□□□□□
Hai guys,
we are planning to implement an ip telephony network with callmanager 6.x.Could some body tell me how to synchronise the callmanager 6.1 with the NTP server.
Also i would like to know what "Cisco Unified Communications Operating System Administration"
and what is a "Cisco Unified Presence Server".
we are planning to implement an ip telephony network with callmanager 6.x.Could some body tell me how to synchronise the callmanager 6.1 with the NTP server.
Also i would like to know what "Cisco Unified Communications Operating System Administration"
and what is a "Cisco Unified Presence Server".
Comments
-
mikej412 Member Posts: 10,086 ■■■■■■■■■■You configure it when you configure your first node. If you didn't configure one there, you can use the CLI later - utils ntp config
Cisco recommends using an external NTP server that is stratum 9 or higher (1 - 9). The other nodes in a cluster get their time from the first node.antonyice1 wrote:Also i would like to know what "Cisco Unified Communications Operating System Administration" and what is a "Cisco Unified Presence Server".
As for "Cisco Unified Communications Operating System Administration" -- here's the link to the guide.
Cisco Unified Communications Operating System Administration Guide for Cisco Unified Presence Release 6.0(1)
But it could also be a Class -- UCSAE (Cisco Unified Communications System Administration/Engineer).
Or it could be the Graphical User Interface (GUI) you log into.:mike: Cisco Certifications -- Collect the Entire Set!