Question about 6.0

mysql1988

I'm pretty comfortable with callmanager 4.X

So I decided to play around with 6.0 on my vmware server.
I want to add an Ip communicator and for some reason it is not registering. When I go to the CCMadmin page it doesn't give me a place to add the mac address for the IP communicator like CCM ver 4. it only asks for device name.

Any help will be appreciated.

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

mysql1988

are you telling me no one on techexams is running callmanager 6.0????????

Luckycharms

If you can wait till this weekend... I will install and test... I have been running most of my labs off of 4.x simply for testing...And I haven't even tryed to get a communicator up and running...??

Is this the Ipcommunicator or Cisco Unified Personal Communicator or Cisco Unified Mobile Communicator.

( reason being I usally end up calling all of the IP communicator...)

but until then read this ... hope it helps

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/2_0/english/administration/guide/CADnet.html

dtlokee

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/2_1/english/administration/guide/cag21pre.html#wp1044180

You should use the MAC address of the NIC for the device name.

DaPunnisher

Do you have enough DLUs?

dtlokee

DaPunnisher wrote:

Do you have enough DLUs?

I'd guess since it's on VMWare it's not a production box (TAC won't support it) and he's probably using the 50 starter licenses.

mikeeo

Make sure the call manager service is running.