broken switch ??? (Fixed)

hodgey87 · July 2008

guys got this when i logged into a switch today does anyone know if it can be fixed thanks

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950-24 starting...
Base ethernet MAC Address: 00:19:2f:c0:26:c0
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 405 files, 5 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 4881408
flashfs[0]: Bytes available: 2860032
flashfs[0]: flashfs fsck took 7 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading "flash:/c2950-i6q4l2-mz.121-22.EA8a.bin"...#############################
################################################################################
################################################################################
########

File "flash:/c2950-i6q4l2-mz.121-22.EA8a.bin" uncompressed and installed, entry
point: 0x80010000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA8a, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 28-Jul-06 15:16 by weiliu
Image text-base: 0x80010000, data-base: 0x8056A000

Initializing flashfs...
flashfs[1]: 405 files, 5 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 4881408
flashfs[1]: Bytes available: 2860032
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
%Error: initializing transceiver port Fa0/1
%Error: initializing transceiver port Fa0/2
%Error: initializing transceiver port Fa0/3
%Error: initializing transceiver port Fa0/4
%Error: initializing transceiver port Fa0/5
%Error: initializing transceiver port Fa0/6
%Error: initializing transceiver port Fa0/7
%Error: initializing transceiver port Fa0/8
%Error: initializing transceiver port Fa0/9
%Error: initializing transceiver port Fa0/10
%Error: initializing transceiver port Fa0/11
%Error: initializing transceiver port Fa0/12
%Error: initializing transceiver port Fa0/13
%Error: initializing transceiver port Fa0/14
%Error: initializing transceiver port Fa0/15
%Error: initializing transceiver port Fa0/16
%Error: initializing transceiver port Fa0/17
%Error: initializing transceiver port Fa0/18
%Error: initializing transceiver port Fa0/19
%Error: initializing transceiver port Fa0/20
%Error: initializing transceiver port Fa0/21
%Error: initializing transceiver port Fa0/22
%Error: initializing transceiver port Fa0/23
%Error: initializing transceiver port Fa0/24

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x0D)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id D

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x0D data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id D

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x0E)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id E

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x0E data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id E

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x0F)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id F

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x0F data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id F

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x10)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 10

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x10 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 10

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x11)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 11

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x11 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 11

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x12)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 12

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x12 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 12

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x13)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 13

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x13 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 13

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x14)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 14

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x14 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 14

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x15)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 15

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x15 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 15

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x16)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 16

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x16 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 16

Error writing MII_CONTROL register
POST set PHY loopback failed.strata_cmic_read_miim ERROR:
timeout (addr=0x00 id=0x17)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 17

Error reading MII_CONTROL registercmic_write_miim ERROR: timeout (addr=0x00 id=0
x17 data=0xA10B)

%PLATFORM_HW-3-MIIM_OP_FAILURE:
Unable to read PHY register at addr 0 for phy id 17

Error writing MII_CONTROL register
POST set PHY loopback failed.
POST: Loop back Test Failed on FastEthernet0/1. State:Disabled
POST: Loop back Test Failed on FastEthernet0/2. State:Disabled
POST: Loop back Test Failed on FastEthernet0/3. State:Disabled
POST: Loop back Test Failed on FastEthernet0/4. State:Disabled
POST: Loop back Test Failed on FastEthernet0/5. State:Disabled
POST: Loop back Test Failed on FastEthernet0/6. State:Disabled
POST: Loop back Test Failed on FastEthernet0/7. State:Disabled
POST: Loop back Test Failed on FastEthernet0/8. State:Disabled
POST: Loop back Test Failed on FastEthernet0/9. State:Disabled
POST: Loop back Test Failed on FastEthernet0/10. State:Disabled
POST: Loop back Test Failed on FastEthernet0/11. State:Disabled
POST: Loop back Test Failed on FastEthernet0/12. State:Disabled
POST: Loop back Test Failed on FastEthernet0/13. State:Disabled
POST: Loop back Test Failed on FastEthernet0/14. State:Disabled
POST: Loop back Test Failed on FastEthernet0/15. State:Disabled
POST: Loop back Test Failed on FastEthernet0/16. State:Disabled
POST: Loop back Test Failed on FastEthernet0/17. State:Disabled
POST: Loop back Test Failed on FastEthernet0/18. State:Disabled
POST: Loop back Test Failed on FastEthernet0/19. State:Disabled
POST: Loop back Test Failed on FastEthernet0/20. State:Disabled
POST: Loop back Test Failed on FastEthernet0/21. State:Disabled
POST: Loop back Test Failed on FastEthernet0/22. State:Disabled
POST: Loop back Test Failed on FastEthernet0/23. State:Disabled
POST: Loop back Test Failed on FastEthernet0/24. State:Disabled

KGhaleon · July 2008

Could it be your image, perhaps? You might try throwing a clean image on it.

hodgey87 · July 2008

hi thanks,

ive managed to get onto the ios now, however ive got the syst led being amber i know it shouldnt be that colour

any ideas

tiersten · July 2008

Do as KGhaleon suggested and load a known good copy of IOS for that switch on to it.

If that doesn't fix it then the switch is probably dead.

hodgey87 · July 2008

thanks for the suggestions i opened the case and the fan was disconnected dont know why

just reconnected it and everything seems to be working fine

thanks

KGhaleon · July 2008

broken switch ??? (Fixed)

Comments