CCNA LAB

I want to build a lab to study for CCNA i already got some equipment and books to start the studies.

Equipment:

2 - 2501 router
2 - 2503 router
1 - 2521 router
2 - 1912 switch

All of these are memory maxed... What else should i buy??? i read in alot of post a 2950 and maybe a 2509||2510 are really good study materias for CCNA. What should i buy... thanks

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

Plazma

Looks like you got the routers covered, so long as they can route the IGP's discussed and hnadle frame-relay and VLAN routing.

Switch wise 2950's are by far the best for the CCNA & CCNP study route.. though with the CCNP you should add a L3 switch to your mix (3550 EMI) or so.

Supermiguel

so for now all i need is a 2950??? do i need a 2509or2510???? also how do i know if they can do IGP

TMM3

yea just get a 2950 and you will be fine.
IGP = Interior gateway protocol = rip, rip2, eigrp, ospf is all you need for ccnp exam

Supermiguel

I see that i need experience on SDM which router should i buy??? a 2610XM???

tiersten

Scroll down

Supermiguel

Ok this is my lab set up:

2 - 2501 router
2 - 2503 router
1 - 2521 router
1 - 2610MX router
2 - 1912 switch
1 - 2950 switch

Im going to be taking the CCNA test in about 2/3 weeks do i need anything else???? thanks all of you...

Supermiguel

any one???

tiersten

You don't need to bump your post if nobody has replied within a few hours.

If its in 2-3 weeks then no. There isn't anything else you need. If you really want to buy something then get another 2950 switch since the 1912 switches you have aren't any use for any of the current certifications.

Check the FAQ sticky at the top of the forum. There are lots of posts about what hardware you need and what would be nice to have.

hypnotoad

I think you'll do fine -- that equipment is more than most people have!

rbutturini

Man, that's a pretty nice lab! can I come over and play?