2600 Router and Network Module

ramjet666

Hi,

I have a 2610 router and have just got a NM-2E2W Network Module, the only thing is the IOS does not recognise it.

Slot 1:
        Unknown (type 30) Port adapter
        Port adapter is disabled 
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware revision 1.2           Board revision C0
        Serial number     17201899      Part number    800-01171-05
        FRU Part Number:  NM-2E2W=

        Test history      0x0           RMA number     00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x00: 01 1E 01 02 01 06 7A EB 50 04 93 05 00 00 00 00
          0x10: 60 00 00 00 99 11 20 17 FF FF FF FF FF FF FF FF

IOS:

ROUTER-D-2610#show version
Cisco Internetwork Operating System Software 
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(1[IMG]https://us.v-cdn.net/6030959/uploads/images/smilies/icon_cool.gif[/IMG], RELEASE SOFTWARE (fc3)
Technical Support: [url]http://www.cisco.com/techsupport[/url]
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 15-Mar-06 14:16 by dchih
Image text-base: 0x80008098, data-base: 0x81A0888C

ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(1[IMG]https://us.v-cdn.net/6030959/uploads/images/smilies/icon_cool.gif[/IMG], RELEASE SOFTWARE (fc3)

ROUTER-D-2610 uptime is 19 minutes
System returned to ROM by reload
System image file is "flash:c2600-ik9o3s3-mz.123-18.bin"

How can I make this Module work?

Cheers,
Roger.

tiersten

The combo NMs aren't supported in the 2600 series routers.

ramjet666

tiersten wrote:

The combo NMs aren't supported in the 2600 series routers.

Damn it, was looking forward to using it.