help with subnetting steps & pent3 labtop Q?

this is my first reply or new sub anyways can anybody help with the last steps of subnetting , and i have a pent 3 labtop and when Istart it it say master boot record not found,,so far i think the hdd is bad please help & stay tune to my postings i will be putting some of my training websites off my personel burned cd

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

CCIE2008

Hi, depending on the OS, you can try a few different things.

dos, boot with a dos floppy that contains fdisk. run fdisk /mbr
win 9x boot with the appropriate 9x floppy and run the same command

Windows 2000/xp
boot from cd and choose repair. this launches recovery console. select the appropriate installation that is listed. usually choice 1 if you only have 1 os installed. enter your password as requested. at the command prompt type: fixboot and press enter. then fixmbr and press enter. Reboot and see if that works.

NT i cant remember the method. It's been a while since I worked with nt. If you have NT let me know and ill see if i can find it for you. That should do it.

Ricka182

If you need help with Subnetting try here>>>http://www.learntosubnet.com/.

bighusker

I can't imagine you'd need to know anything about subnetting for the A+ test. Hell, the network+ test doesn't even go beyond the level of "what's a subnet mask?"

renatele

hmmm... took the core on 6th, and did have the subnetting question. Something in effect of matching particular ip to the subnet mask.