OSPF Problem

mcse_696

I have frame relay hub and spoke running ospf POINT to Multipoint on R1 R2 R3 everythings is fine except R4 R5 Cant advertise the links outside their area R4 is same area R3 and R5 same area R1


R1
Neighbor ID Pri state Dead Time Address Interface
5.5.5.5 0 FULL/ - 00:00:32 10.1.1.10 Fastethernet0/1
0
3.3.3.3 0 FULL/ - 00:01:41 10.1.1.3 Serial1/0.2
2.2.2.2 0 FULL/ - 00:01:45 10.1.1.2 Serial1/0.2

R2
Neighbor ID Pri state Dead Time Address Interface
1.1.1.1 0 FULL/ - 00:01:40 10.1.1.1 Serial1/3

R3
Neighbor ID Pri state Dead Time Address Interface
4.4.4.4 0 FULL/ - 00:00:38 10.1.1.14 Fastethernet0/1
0
1.1.1.1 0 FULL/- 00:01:54 10.1.1.1 Serial2/3

R4
Neighbor ID Pri state Dead Time Address Interface
3.3.3.3 1 FULL/DR 00:00:31 10.1.1.13 Fastethernet0/1

R5
Neighbor ID Pri state Dead Time Address Interface
1.1.1.1 1 FULL/DR 00:00:36 10.1.1.9 Fastethernet0/1

tech-airman

mcse_696 wrote:

I have frame relay hub and spoke running ospf POINT to Multipoint on R1 R2 R3 everythings is fine except R4 R5 Cant advertise the links outside their area R4 is same area R3 and R5 same area R1


R1
Neighbor ID Pri state Dead Time Address Interface
5.5.5.5 0 FULL/ - 00:00:32 10.1.1.10 Fastethernet0/1
0
3.3.3.3 0 FULL/ - 00:01:41 10.1.1.3 Serial1/0.2
2.2.2.2 0 FULL/ - 00:01:45 10.1.1.2 Serial1/0.2

R2
Neighbor ID Pri state Dead Time Address Interface
1.1.1.1 0 FULL/ - 00:01:40 10.1.1.1 Serial1/3

R3
Neighbor ID Pri state Dead Time Address Interface
4.4.4.4 0 FULL/ - 00:00:38 10.1.1.14 Fastethernet0/1
0
1.1.1.1 0 FULL/- 00:01:54 10.1.1.1 Serial2/3

R4
Neighbor ID Pri state Dead Time Address Interface
3.3.3.3 1 FULL/DR 00:00:31 10.1.1.13 Fastethernet0/1

R5
Neighbor ID Pri state Dead Time Address Interface
1.1.1.1 1 FULL/DR 00:00:36 10.1.1.9 Fastethernet0/1

mcse_696,

What is the physical topology between these routers?

kryolla

check your ospf network types it looks like they are not compatible and is your faster ethernet interfaces in each area are they separated by vlans.