cisco VPN client and IOS head-end

I was wondering if this was possible. I have an adsl modem forwarding IPsec to a cisco IOS router, I also have a laptop with Cisco VPN client installed.

I was wondering what configuration I needed to do on the cisco router and if somebody could point me in the right direction of a cisco doc or something. The ISCW book mentions configuring a IOS head-end in conjunction with the cisco VPN client.

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Plazma

Pay close attention to EasyVPN and the Remote VPN sections of the ISCW. EasyVPN can be setup via SDM and isn't too difficult.

_maurice

As far as I can remember, I think the ISCW only covers configuring the head end via the SDM.

aueddonline

_maurice wrote:

As far as I can remember, I think the ISCW only covers configuring the head end via the SDM.

is that the GUI, because I don't have access to that

ilcram19-2

what router do you have? you can also use ssl VPN from cisco WEBVPN and install the downloadable client on ur pc

aueddonline

ilcram19-2 wrote:

what router do you have? you can also use ssl VPN from cisco WEBVPN and install the downloadable client on ur pc

it'll be one of these

Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(2)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Thu 23-Jun-05 16:06 by kellmill

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

wireless uptime is 3 days, 4 hours, 0 minutes
System returned to ROM by reload
System image file is "flash:c2600-adventerprisek9-mz.124-2.T.bin"

Cisco IOS Software, 2600 Software (C2691-ADVENTERPRISEK9_SNA-M), Version 12.4(17), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 16:24 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

R1-2691 uptime is 2 weeks, 2 days, 5 hours, 25 minutes
System returned to ROM by reload
System image file is "slot0:c2691-adventerprisek9_sna-mz.124-17.bin"