Hello I received a couple of 2501 routers today and have been playing around with them. While I have been able to configure my serial interfaces and have connectivity between the routers. the problem I am having is there are no ethernet interfaces on either router. I purchased a couple of transceiver and they are installed. the power led comes on and the link led comes on when i connect it to a hub, or to each other with a crossover cable.
show interface ?
command produces the following
Async Async interface
Null Null interface
Serial Serial
accounting Show interface accounting
crb Show interface routing/bridging info
irb Show interface routing/bridging info
<cr>
and initial startup has this
%SYS-5-RELOAD: Reload requested
System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 2048 Kbytes of main memory
%SYS-4-CONFIG_NEWER: Configurations from version 11.2 may not be correctly understood.
F3: 3941240+51568+146764 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-F-L), Version 11.2(15a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Mon 24-Aug-98 00:58 by tmullins
Image text-base: 0x0301F6AC, data-base: 0x00001000
cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 09775962, with hardware revision 00000000
Bridging software.
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
So where are my ethernet interfaces? did I just buy some bad routers?
thanks for any help I've been scouring the internet for hours trying to find an answer
