Dear Guys,
Got a new pilot#, received 100 numbers. My box is Cisco AS5350 running IOS 12.4T.
Say my new number block is: 1234621-1234721
How can i configure the dial plan under dial-peer? Did i miss something in my config? Im stuck, need help.
!
dial-peer voice 1 pots
destination-pattern T
translate-outgoing calling 6
translate-outgoing called 5
no digit-strip
direct-inward-dial
port 3/1:d
forward-digits all
!
dial-peer voice 2 voip
destination-pattern 12346T
translate-outgoing calling 1
translate-outgoing called 4
voice-class codec 1
session protocol sipv2
session target ipv4
.x.x.x
dtmf-relay rtp-nte
fax-relay ecm disable
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
no vad
!
dial-peer voice 14 voip
destination-pattern 12347T
translate-outgoing calling 1
translate-outgoing called 4
voice-class codec 1
session protocol sipv2
session target ipv4
.x.x.x
dtmf-relay rtp-nte
fax-relay ecm disable
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
no vad
!
I appreciate your help.
Thanks a lot.
