nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

config mem, config net

creamy_stew

Just want to make sure I have things right:

config mem = copy start run

config net =copy tftp run

Are they exactly the same thing?

/creamy

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

Netwurk

creamy_stew wrote:

Just want to make sure I have things right:

config mem = copy start run

config net =copy tftp run

Are they exactly the same thing?

/creamy

I think the end result is the same, but the prompts for the info are different. Those are older commands that will probably go away at some point.

Anyway, it's not something that you need to know for the CCNA. And it's recommended to configure from the terminal, not from memory or the network.

The only old command that I still use frequently is "wr mem", which is quicker to type than "copy run start".

laidbackfreak

Netwurk wrote:

The only old command that I still use frequently is "wr mem", which is quicker to type than "copy run start".

i love that term, i just most of my engineers by that command, old school guys know it and use it without blinking, new guys always go wow.... lol

JavonR

Netwurk wrote:

creamy_stew wrote:

Just want to make sure I have things right:

config mem = copy start run

config net =copy tftp run

Are they exactly the same thing?

/creamy

I think the end result is the same, but the prompts for the info are different. Those are older commands that will probably go away at some point.

Anyway, it's not something that you need to know for the CCNA. And it's recommended to configure from the terminal, not from memory or the network.

The only old command that I still use frequently is "wr mem", which is quicker to type than "copy run start".

You can just type "wr" and it does the same thing

Netwurk

JavonR wrote:

You can just type "wr" and it does the same thing

I don't think that was always true, but I did try it for fun on my 3550 and it worked there

"wr ter" is also one I sometimes use, but sh run is just as easy to type and I needed to get in the habit of using the new commands when I was going for my CCNA

bighornsheep

show run is great! You can use | for output modifications. I don't think write terminal supports |