Hair Club for Man FR configuration

jbaellojbaello Member Posts: 1,191 ■■■□□□□□□□
in CCNA & CCENT
MikeJ says " "Hi, I'm router 1 and I'm a frame-relay switch, but I'm also a client (using my Wic-1t)." LAWL :P

I'm having Identity Crisis on where to point my DCE and configure my frame-relay route.
· Share on FacebookShare on Twitter

Comments

  • tierstentiersten Member Posts: 4,505
    Wha? What are you going on about...
    · Share on FacebookShare on Twitter
  • jbaellojbaello Member Posts: 1,191 ■■■□□□□□□□
    Here...

    R1(config-if)#frame-relay route 102 interface serial 1/1 201
    R1(config-if)#frame-relay route 103 interface serial 1/1 301

    frame-relay switching
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    interface Loopback0
    ip address 1.1.1.1 255.255.255.255
    !
    interface Ethernet0/0
    ip address 10.160.8.1 255.255.255.0
    half-duplex
    !
    interface Serial0/0 ***** WIC-1T (DTE End) *****
    no ip address
    !
    interface BRI0/0
    no ip address
    encapsulation hdlc
    shutdown
    !
    interface Ethernet0/1
    ip address 10.10.10.1 255.255.255.0
    half-duplex
    !
    interface Serial1/0 - ***** NM-A4/S (DCE End from R1 WIC-1T interface) *****
    no ip address
    encapsulation frame-relay
    clock rate 128000
    frame-relay intf-type dce
    frame-relay route 102 interface Serial1/1 201
    frame-relay route 103 interface Serial1/1 301
    !
    interface Serial1/1 ***** NM-A4/S (DCE End from R2) *****
    no ip address
    !
    interface Serial1/2 ***** NM-A4/S (DCE End from R3) *****
    no ip address
    shutdown
    !
    interface Serial1/3
    no ip address
    shutdown
    !
    · Share on FacebookShare on Twitter
  • jbaellojbaello Member Posts: 1,191 ■■■□□□□□□□
    It looks like this thing is going to work, just have to finish the rest of the configuration and test the spokes connectivity.
    · Share on FacebookShare on Twitter
  • jbaellojbaello Member Posts: 1,191 ■■■□□□□□□□
    My new version of "Hermaphrodite Hub" and Spoke...
    · Share on FacebookShare on Twitter
  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    jbaello wrote: »
    Here...
    I'll see your attempt at a configuration and raise you 8 configured Serial Ports
    frame-relay switching

    interface serial 1/0
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 102 interface Serial1/1 201
    frame-relay route 103 interface Serial1/2 301
    frame-relay route 104 interface Serial1/3 401
    frame-relay route 105 interface Serial1/4 501
    frame-relay route 106 interface Serial1/5 601
    frame-relay route 107 interface Serial1/6 701
    frame-relay route 108 interface Serial1/7 801

    interface serial 1/1
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 201 interface Serial1/0 102
    frame-relay route 203 interface Serial1/2 302
    frame-relay route 204 interface Serial1/3 402
    frame-relay route 205 interface Serial1/4 502
    frame-relay route 206 interface Serial1/5 602
    frame-relay route 207 interface Serial1/6 702
    frame-relay route 208 interface Serial1/7 802

    interface serial 1/2
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 301 interface Serial1/0 103
    frame-relay route 302 interface Serial1/1 203
    frame-relay route 304 interface Serial1/3 403
    frame-relay route 305 interface Serial1/4 503
    frame-relay route 306 interface Serial1/5 603
    frame-relay route 307 interface Serial1/6 703
    frame-relay route 308 interface Serial1/7 803

    interface serial 1/3
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 401 interface Serial1/0 104
    frame-relay route 402 interface Serial1/1 204
    frame-relay route 403 interface Serial1/2 304
    frame-relay route 405 interface Serial1/4 504
    frame-relay route 406 interface Serial1/5 604
    frame-relay route 407 interface Serial1/6 704
    frame-relay route 408 interface Serial1/7 804

    interface serial 1/4
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 501 interface Serial1/0 105
    frame-relay route 502 interface Serial1/1 205
    frame-relay route 503 interface Serial1/2 305
    frame-relay route 504 interface Serial1/3 405
    frame-relay route 506 interface Serial1/5 605
    frame-relay route 507 interface Serial1/6 705
    frame-relay route 508 interface Serial1/7 805

    interface serial 1/5
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 601 interface Serial1/0 106
    frame-relay route 602 interface Serial1/1 206
    frame-relay route 603 interface Serial1/2 306
    frame-relay route 604 interface Serial1/3 406
    frame-relay route 605 interface Serial1/4 506
    frame-relay route 607 interface Serial1/6 706
    frame-relay route 608 interface Serial1/7 806

    interface serial 1/6
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 701 interface Serial1/0 107
    frame-relay route 702 interface Serial1/1 207
    frame-relay route 703 interface Serial1/2 307
    frame-relay route 704 interface Serial1/3 407
    frame-relay route 705 interface Serial1/4 507
    frame-relay route 706 interface Serial1/5 607
    frame-relay route 708 interface Serial1/7 707

    interface serial 1/7
    no ip address
    no ip directed-broadcast
    encapsulation frame-relay
    frame-relay intf-type dce
    frame-relay lmi-type ANSI
    clock rate 115200
    frame-relay route 801 interface Serial1/0 108
    frame-relay route 802 interface Serial1/1 208
    frame-relay route 803 interface Serial1/2 308
    frame-relay route 804 interface Serial1/3 408
    frame-relay route 805 interface Serial1/4 508
    frame-relay route 806 interface Serial1/5 608
    frame-relay route 807 interface Serial1/6 708
    I don't have a WIC-1T installed in my frame-relay 3620 with NM-8A/S to see if it can also be a frame-relay client. This is from some old notes and not an actual "show run" from the router -- so there could be some typos.

    Q: How do you do Spoke to Spoke routing if you only have 3 routers and one of them is acting as the frame-relay switch.

    A: Try and see if you can use another serial port on your frame-relay switch as another router. I've suggested it before -- but I've never tried it. :D
    :mike: Cisco Certifications -- Collect the Entire Set!
    · Share on FacebookShare on Twitter
  • jbaellojbaello Member Posts: 1,191 ■■■□□□□□□□
    I haz teh dumb with that many route lawl...

    Did it worked?
    · Share on FacebookShare on Twitter
  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    jbaello wrote: »
    Did it worked?
    The people I suggested it to never posted back if it worked. You can be the first. :D
    :mike: Cisco Certifications -- Collect the Entire Set!
    · Share on FacebookShare on Twitter
Sign In or Register to comment.