Hair Club for Man FR configuration

MikeJ says " "Hi, I'm router 1 and I'm a frame-relay switch, but I'm also a client (using my Wic-1t)." LAWL :P

I'm having Identity Crisis on where to point my DCE and configure my frame-relay route.

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

tiersten

Wha? What are you going on about...

jbaello

Here...

R1(config-if)#frame-relay route 102 interface serial 1/1 201
R1(config-if)#frame-relay route 103 interface serial 1/1 301

frame-relay switching
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Ethernet0/0
ip address 10.160.8.1 255.255.255.0
half-duplex
!
interface Serial0/0 ***** WIC-1T (DTE End) *****
no ip address
!
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
!
interface Ethernet0/1
ip address 10.10.10.1 255.255.255.0
half-duplex
!
interface Serial1/0 - ***** NM-A4/S (DCE End from R1 WIC-1T interface) *****
no ip address
encapsulation frame-relay
clock rate 128000
frame-relay intf-type dce
frame-relay route 102 interface Serial1/1 201
frame-relay route 103 interface Serial1/1 301
!
interface Serial1/1 ***** NM-A4/S (DCE End from R2) *****
no ip address
!
interface Serial1/2 ***** NM-A4/S (DCE End from R3) *****
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!

jbaello

It looks like this thing is going to work, just have to finish the rest of the configuration and test the spokes connectivity.

jbaello

My new version of "Hermaphrodite Hub" and Spoke...

mikej412

jbaello wrote: »

Here...

I'll see your attempt at a configuration and raise you 8 configured Serial Ports

frame-relay switching

interface serial 1/0
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 102 interface Serial1/1 201
frame-relay route 103 interface Serial1/2 301
frame-relay route 104 interface Serial1/3 401
frame-relay route 105 interface Serial1/4 501
frame-relay route 106 interface Serial1/5 601
frame-relay route 107 interface Serial1/6 701
frame-relay route 108 interface Serial1/7 801

interface serial 1/1
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 201 interface Serial1/0 102
frame-relay route 203 interface Serial1/2 302
frame-relay route 204 interface Serial1/3 402
frame-relay route 205 interface Serial1/4 502
frame-relay route 206 interface Serial1/5 602
frame-relay route 207 interface Serial1/6 702
frame-relay route 208 interface Serial1/7 802

interface serial 1/2
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 301 interface Serial1/0 103
frame-relay route 302 interface Serial1/1 203
frame-relay route 304 interface Serial1/3 403
frame-relay route 305 interface Serial1/4 503
frame-relay route 306 interface Serial1/5 603
frame-relay route 307 interface Serial1/6 703
frame-relay route 308 interface Serial1/7 803

interface serial 1/3
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 401 interface Serial1/0 104
frame-relay route 402 interface Serial1/1 204
frame-relay route 403 interface Serial1/2 304
frame-relay route 405 interface Serial1/4 504
frame-relay route 406 interface Serial1/5 604
frame-relay route 407 interface Serial1/6 704
frame-relay route 408 interface Serial1/7 804

interface serial 1/4
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 501 interface Serial1/0 105
frame-relay route 502 interface Serial1/1 205
frame-relay route 503 interface Serial1/2 305
frame-relay route 504 interface Serial1/3 405
frame-relay route 506 interface Serial1/5 605
frame-relay route 507 interface Serial1/6 705
frame-relay route 508 interface Serial1/7 805

interface serial 1/5
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 601 interface Serial1/0 106
frame-relay route 602 interface Serial1/1 206
frame-relay route 603 interface Serial1/2 306
frame-relay route 604 interface Serial1/3 406
frame-relay route 605 interface Serial1/4 506
frame-relay route 607 interface Serial1/6 706
frame-relay route 608 interface Serial1/7 806

interface serial 1/6
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 701 interface Serial1/0 107
frame-relay route 702 interface Serial1/1 207
frame-relay route 703 interface Serial1/2 307
frame-relay route 704 interface Serial1/3 407
frame-relay route 705 interface Serial1/4 507
frame-relay route 706 interface Serial1/5 607
frame-relay route 708 interface Serial1/7 707

interface serial 1/7
no ip address
no ip directed-broadcast
encapsulation frame-relay
frame-relay intf-type dce
frame-relay lmi-type ANSI
clock rate 115200
frame-relay route 801 interface Serial1/0 108
frame-relay route 802 interface Serial1/1 208
frame-relay route 803 interface Serial1/2 308
frame-relay route 804 interface Serial1/3 408
frame-relay route 805 interface Serial1/4 508
frame-relay route 806 interface Serial1/5 608
frame-relay route 807 interface Serial1/6 708

I don't have a WIC-1T installed in my frame-relay 3620 with NM-8A/S to see if it can also be a frame-relay client. This is from some old notes and not an actual "show run" from the router -- so there could be some typos.

Q: How do you do Spoke to Spoke routing if you only have 3 routers and one of them is acting as the frame-relay switch.

A: Try and see if you can use another serial port on your frame-relay switch as another router. I've suggested it before -- but I've never tried it.

jbaello

I haz teh dumb with that many route lawl...

Did it worked?

mikej412

jbaello wrote: »

Did it worked?

The people I suggested it to never posted back if it worked. You can be the first.