Help with 2 2500 routers

gaby_978

Hey guys i had these two routers working fine a few months ago. I am setting up my lab again and 2 of my 2500 routers keep booting in ROMmon. They keep saying the following:
Loading cisco2-2500 ... [timed out]

File read failed -- Time out


router5(boot)>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Wed 10-Sep-97 13:06 by phester
Image text-base: 0x01010000, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

router5 uptime is 3 minutes
System restarted by power-on
Running default software

cisco 2500 (68030) processor (revision M) with 2048K/2048K bytes of memory.
Processor board ID 08390463, with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
1 Token Ring/IEEE 802.5 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102



any help on this would be greatly apprecitated

rakem

i would try to reload the IOS if you can...