T1 -> T1 Lab config?
I just added a 4 port T1 wic and I am building a lab
Juniper -> Cisco
Juniper -> Juniper
I am using a T1 crossover but can't get the Juniper side configured properly....I have no issues in the past setting up T1s over a channelized DS3....
Anyone have an example/working config for a T1?
mtu 1504;
clocking internal;
encapsulation ppp;
t1-options {
timeslots 1-24;
buildout 0-132;
line-encoding b8zs;
framing esf;
}
unit 0 {
point-to-point;
family inet {
address 10.8.8.1/32 {
destination 10.8.8.2;
}
}
is what I was trying....
Juniper -> Cisco
Juniper -> Juniper
I am using a T1 crossover but can't get the Juniper side configured properly....I have no issues in the past setting up T1s over a channelized DS3....
Anyone have an example/working config for a T1?
mtu 1504;
clocking internal;
encapsulation ppp;
t1-options {
timeslots 1-24;
buildout 0-132;
line-encoding b8zs;
framing esf;
}
unit 0 {
point-to-point;
family inet {
address 10.8.8.1/32 {
destination 10.8.8.2;
}
}
is what I was trying....
CPTE, C|EH, OSCP, CCA, ACSP