Catalyst 3550 Switch
DamienM
Member Posts: 29 ■□□□□□□□□□
in CCNA & CCENT
Hi Guys
Can anybody take me through the process for disabling port security, enabling the port(no shut), and re-enabling port security again on a 3550 switch. I would be grateful if you could post the commands starting with login all the way through to logout.
Thanks a million guys.
Can anybody take me through the process for disabling port security, enabling the port(no shut), and re-enabling port security again on a 3550 switch. I would be grateful if you could post the commands starting with login all the way through to logout.
Thanks a million guys.
Damien Mallon
Comments
-
Ten9t6
Member Posts: 691
check this out...towards the middle of the page.
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801cdf52.htmlKenny
A+, Network+, Linux+, Security+, MCSE+I, MCSE:Security, MCDBA, CCNP, CCDP, CCSP, CCVP, CCIE Written (R/S, Voice),INFOSEC, JNCIA (M and FWV), JNCIS (M and FWV), ENA, C|EH, ACA, ACS, ACE, CTP, CISSP, SSCP, MCIWD, CIWSA